FlySky-FSi10 with KK2.1 , no arming
Posted: Fri Apr 21, 2017 5:47 pm
Trying to make my FlySky transmitter work together with my KK2.1 Multi-Rotor control board I have several problems.
Main problem;.
According the YouTube Videos ; I make all the proposed settings
The receiver test is OK.
Then when I run through the last Menu and I press BACK immediately power is switched off from the Control Board and the receiver automatically.
This happens every time when I go tthrough all the menus ??
Furher question what means; Channel 1: NU11 ON in the transmitter screen
further I see NO FLYMODE SELECTED, ; I see no possibillty to select any Fymode.
I hope someone has suggestions to help me further...!
Herman
Main problem;.
According the YouTube Videos ; I make all the proposed settings
The receiver test is OK.
Then when I run through the last Menu and I press BACK immediately power is switched off from the Control Board and the receiver automatically.
This happens every time when I go tthrough all the menus ??
Furher question what means; Channel 1: NU11 ON in the transmitter screen
further I see NO FLYMODE SELECTED, ; I see no possibillty to select any Fymode.
I hope someone has suggestions to help me further...!
Herman