In updating eepe to support the new items I've found some odd bugs. One of them, to do with the timer, is taking a while to track down.
Mike.
M128 Upgrade to Turnigy 9X
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: M128 Upgrade to Turnigy 9X
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: M128 Upgrade to Turnigy 9X
Just finished swapping the '64 for a '2561 on the spare board. Got to do all the mods and re-connect the programming and voice wires.
I'll put my stripboard voice module in this one.
Mike.
I'll put my stripboard voice module in this one.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: M128 Upgrade to Turnigy 9X
Nice..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: M128 Upgrade to Turnigy 9X
Updated the M64 to M128, that was a success... testing out the firmware.... seems that the P1, P2, P3 are not responding via calibration.... I tested it with OpenTx and the Switches do work... first anomaly I found... Continue to test...
Custom 9x with M64/Telemetry Mod
Re: M128 Upgrade to Turnigy 9X
You mean the AIL and THR switches? There's an option you must turn on in General settings menu if you did the telemetry mod..
Mike did this to avoid compiling an extra version of the er9x-128 firmware.. So, now if we have on screen telemetry, just turn the mod on in the FW
João
Mike did this to avoid compiling an extra version of the er9x-128 firmware.. So, now if we have on screen telemetry, just turn the mod on in the FW
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: M128 Upgrade to Turnigy 9X
I think this was for me. But no the pots were not working. Mike updated fw. I will upload tonight and test when I get a chance later this evening.jhsa wrote:You mean the AIL and THR switches? There's an option you must turn on in General settings menu if you did the telemetry mod..
Mike did this to avoid compiling an extra version of the er9x-128 firmware.. So, now if we have on screen telemetry, just turn the mod on in the FW
João
Custom 9x with M64/Telemetry Mod
Re: M128 Upgrade to Turnigy 9X
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW