![Smile :)](./images/smilies/icon_e_smile.gif)
Question, when displaying range test mode in the multi menu, what is the number to the right of the RSSI? And why is it there?
Thanks
João
EDIT: Running a couple more tests..
The XJT is in D8 mode I assume. How are you getting the telemetry, from the XJT pin 5 (SPort connection) or from the 'D' telemetry connection to COM2 on the Futaba socket?midelic wrote:I'm trying to recreate the joao problem with cells voltage.
I have programmed an openx sensor to send vario Vfas and 3 voltage cells but I cannot see the cells individually on display,I have log them and is zero mostly .
Vfas is displayed correctly for a 2S lipo. I tested with XJT and multi and diy RX same firmware as joao had. All the same error.On his is shwoing cells voltage on mine no. I tried also older ersky 9x firmware the same problem.
Do you have some idea why is not cells displayed ,I see sometimes good values in the log but not consistent.
See the log attached .
And would this cause the problems I am seeing? Cells being sent even If the oXs is not sending them?MikeB wrote:I think Pascal and I have sorted some problems in the Multi code. I'm just running a test to see if they are fixed. The problems include missing a telemetry packet and not getting it re-transmitted.
Mike.