Mike, I have been noticing some strange behavior when copying models from my 9xt radio to the Ar9x and vice-versa.
if a model uses for example the external model on one of the radios, after I copy the model to the other, the internal module is selected.. I have just seen it happen again as I copied a model. Could you please have a look??
I have a little request if possible, and I don't know how difficult it would be to implement it or if it is even possible.
But I copy models between radios a lot, specially when testing, and every time I need to connect the radios to the PC. That makes it impossible to do it at the field unless I take a computer
That is when it is probably when we would share a model with someone else.
Many of us now have bluetooth modules installed in our radios and they work as serial interface devices, right? so that could probably allow for file (model, settings, eeprom, voice files, music files etc) transfer, right?
An ".eepm" file is about 4K so it wouldn't take very long, right?
With mobile phones people even send much bigger files like music and videos over BT.
Maybe we would need some SD card browser to select a file to send to another radio.
This could also be extended to the PC? (you have already data transfer between PC and radio working over BT.
I believe this would be of a great help for most of us and certainly a great addition to a great firmware
Thanks
João
EDIT: New editing also working with the logical switch functions.. Tested on the 9XT and will test with Ar9x in a little while..