This time really bricked Taranis

[Morphin]

Hi
I hope somebody can help.

Current State: Turn on and opentx 2.0.7 is loading fine. I have also access to the SD Card. So good.

But i can't manage to get into boadlader mode. No way (screen blank). I have also tried to flash original firmware (it says something like bootloader not recoginezed) (in DFU-Mode). Also opentx firmware no way. It seems that the boatloader is corrupt....

Andy help

Thank's

[Morphin]

o.k.
i have found this.
http://open-txu.org/home/undergraduate- ... t-loaders/

my last solution. i will try that
Thank's
Andy

[kalle123]

It seems that the boatloader is corrupt....

Andy. There are TWO bootloaders!

Take a deep breath and start reading. -> opentx university.

AND DON'T MISS THAT PAGE!! http://open-txu.org/home/special-intere ... d-taranis/

And you might put your Taranis away for a while. It is not a good idea to do things in a hectic

If the "firmware" bootloader won't work, there is always the other "hardware" bootloader.

Good luck - KH

[Helle]

Hy Andy,

take the German Manual for openTx and Taranis here, its from 14.12. 2014

http://fpv-community.de/showthread.php? ... 1-99/page6

Downloads at #57 and #58

you will find what you need for update Firmware and Bootloader


Helle