I would like to have an arduino pro mini decoding the SBUS signal and driving the 16 servos..
Thanks to Mike, eepskye now sends the 16 channels as SBUS over a USB port, and he also wrote an arduino code to decode the SBUS into 2 PPM streams of 8 channels each.. Thank you so much for that..
However I can also see some advantages in a direct conversion from SBUS to Pwm for driving the servos directly..
I have found this:
http://rc-master.ucoz.ru/publ/19-1-0-87
The page however is in Russian so I used google to translate it.. It uses an arduino Mini to decode the sbus into 16 servo outputs.. It needs an inverter though.
I think Mike managed to invert the signal by coding it on the arduino, so we have a real Sbus signal available.
Attached is the zip file with the code that I downloaded from the Russian site.
EDIT: This attached code compiles.. This is version 2. The one I posted here before didn't compile.. I also found a configurator that we install on the PC. Please have a look at the page.. Again it must be translated
![Smile :)](./images/smilies/icon_e_smile.gif)
http://rc-master.ucoz.ru/publ/19-1-0-105
João