Not sure if the intention is to keep Companion9X (2.0.8) compatible with different Tx firmware forks, but there are several severe bugs loading models from the "stock" Turnigy 9XR Pro firmware:
- Servo limits are off by a factor of 10 (e.g, 125 becomes 12.5)
- Ele and Thr are swapped in inputs (D/R and Expo)
- Ele and Thr are swapped in mixes
- FULL and HALF mix source become switch inputs
As an aside, I've upgraded my firmware to OpenTX 2.0.8, so don't expect any further problems...
Jay