The SD card included in the current release of the 9XR Pro includes voice files which do not match the firmware. Until the present stock of 9XR Pro's is all sold the file below will need to be be installed on the SD card which comes with the radio.
You will need to remove the SD card, put it into a card reader or SD card holder, attach it to your computer and then replace the files already there with these files. If you need help with this see the manual '9XR Pro: Introduction to the Hardware' and 9XR Pro: Communicating with a Computer'. See another topic on this thread for all the manuals individually.
The files include jhsa's voice pack plus the folders you will need to back up models and to record telemetry logs. The radio will add these folders itself but they are included there for completeness. You can write all the manuals to the 'manuals' folder yourself if you wish to have them available say at the field or elsewhere. The firmware folder also includes the r204 upgraded firmware which you can load using the 'Bootloader' mode on your 9XR Pro.
The file with all the manuals is about 20 Mb.
The file with no manuals is just under 10 Mb.
Steve
Correct SD card for 9XR Pro
Correct SD card for 9XR Pro
Last edited by Mutchy on Thu Nov 27, 2014 5:25 am, edited 1 time in total.
Re: Correct SD card for 9XR Pro
Not to be picky, but you should really post that only once and link to that post in the other places.
Now if an update is needed there will be 3 posts to edit, and always some that get forgotten... not to mention people who will get confused as to whether they're the same or not...
Now if an update is needed there will be 3 posts to edit, and always some that get forgotten... not to mention people who will get confused as to whether they're the same or not...
Re: Correct SD card for 9XR Pro
True. This is my preferred site. I should go to the others and link them to here.
Thanks
Steve
Thanks
Steve