switch nuts
switch nuts
Where can I buy new switch nuts? My t9x nuts are rusting and I dont seem to find these type anywhere.
Re: switch nuts
Are you using your T9X under acid rain! Just kidding.
You are in US. Try Acehardware. I found they sometimes have some odd size screw/nuts there. Take your Tx there and try out in their store. I believe they can even special order for you.
You are in US. Try Acehardware. I found they sometimes have some odd size screw/nuts there. Take your Tx there and try out in their store. I believe they can even special order for you.
Re: switch nuts
I would like the same nuts, cant find them anywhere
Re: switch nuts
You could look at 9XR replacement switches from HK, don't know if they come with the nut.
Other than this the same nuts are used on almost any radio, so you could get replacements from other brands. You'll probably pay 1/5th of the price of the 9x for one though
You might also want to check for broken 9xs.
Other than this the same nuts are used on almost any radio, so you could get replacements from other brands. You'll probably pay 1/5th of the price of the 9x for one though
You might also want to check for broken 9xs.
Re: switch nuts
these nuts really can drive you nuts.
I was replacing one of the switch because I broke the lever, pull one out with exact same dimension and spec from a junk Tx, trying to use the original nuts, BUT it won't fit, either the height or the pitch, Have to use the the one on the replacement switch. when eyeballing it, they look the same though.
I was replacing one of the switch because I broke the lever, pull one out with exact same dimension and spec from a junk Tx, trying to use the original nuts, BUT it won't fit, either the height or the pitch, Have to use the the one on the replacement switch. when eyeballing it, they look the same though.
Re: switch nuts
Maybe this helps: http://openrcforums.com/forum/viewtopic ... 120#p37599
Re: switch nuts
Take the old ones off clean them with metal polish and then lacquer them.
“A good politician is quite as unthinkable as an honest banker”
They used to say "if you don’t want to work at McDonald’s, go to college." Now they say "if you want to work at McDonald’s, go to college.”
They used to say "if you don’t want to work at McDonald’s, go to college." Now they say "if you want to work at McDonald’s, go to college.”
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: switch nuts
Ask around if you're a RC club member or at your local flying field. Someone is always throwing away an old radio, especially PCM ones. I gather them up and harvest the sticks and switches for spare pots and nuts and switches. Free gold mine.