Crow braking

[CliffEvans]

Have got v-tail, flaps and ailerons working using the Wizard in Companionx9. I want to use throttle for Crow but no matter what I do I just cannot get anything to work! Have attached my model .eepe file if anybody can help.

[Rob Thomson]

You haver not added in any mix for the thottle - so will not work!

Check this

http://openrcforums.com/forum/viewtopic.php?f=38&t=3451

It is a simple 4 servo wing template with crow, aileron elevator.

Rob

[CliffEvans]

Thanks rob, got it working after a fashion, see file, just got to work out flight conditions now! Sorry to those of you who tried to open this file, you need to change the extension from (.zip) to (.eepe)

[rdeanchurch]

Hmm, I can't unzip that. jZip says its a bad file. What did you use to ceate it?

[Rob Thomson]

I have set myself a job tonight to make up some standard configs for v and t tail glider.

Simple:

Crow, camber, snap flap etc..

Will publish them in a few hours

Sent from my GT-I9300 using Tapatalk 2

[cmez]

Just joined the Taranis set! Delighted with the quality of the hardware and the awesomeness of the Companion software. Slowly getting to grips with the OpenTX programming philosophy. Many thanks to you guys who are helping out on this forum, really appreciate your posts! Let's hope that now the hardware is available, and our experiences develop, we can start to relieve Rob and others a little of the task of educating us newbies.

[Rob Thomson]

Std Glider mixes can be found here:

http://openrcforums.com/forum/viewtopic ... 101&t=3910