Just getting started in this game and have much to learn. I have a flysky TX9X and have flashed it to opentx but its on hell of a learning curve. If someone has a template for this plane It would help me learn about how things are done. It is pretty much the same plane as the bixler 1.2 and Easy star II and several others but has flaps.
Thanks in advance
Template for Bixler2 with flaps?
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Template for Bixler2 with flaps?
Check the speedo iix template I posted.
It does much of what you want.
Sent from my Nexus 7 using Tapatalk 2
It does much of what you want.
Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Template for Bixler2 with flaps?
I can guess the next question..
The template that Rob talks about is here --> http://openrcforums.com/forum/viewtopic.php?f=38&t=3451
The template that Rob talks about is here --> http://openrcforums.com/forum/viewtopic.php?f=38&t=3451
-
- Posts: 277
- Joined: Sun May 06, 2012 8:37 pm
- Country: -
- Location: Fond du Lac, WI
Re: Template for Bixler2 with flaps?
Try the "use model config wizard" under the templates tab on companion9x. That will set up the model with flaps on the AIL switch, adjustable by P2. It also adds slow flap deployment. From there you can adjust the mixes your to your specific needs.
Re: Template for Bixler2 with flaps?
That is another way to do it..
When you have got your head around that. It would be worth adding the sticky throttle (Sticky T-Cut) to your setup. It has saved me a few times when I have pushed the throttle stick accidentally.
With the flaps down you might wish to add a little down elevator when they are selected... Play around with that in companion. You do it by adding another mix to the elevator channel.
I have a Skysurfer which is very much like the Bixler. On launching it, it has a tendency to head into the ground (due in part to the pusher configuration) if you don't give it a strong throw. My throw isn't all that good, so I have added a little up elevator (via a switch) for take off. That allows me enough time to get my hands back on the sticks. Just remember to switch it out at some point on the climb out.
Have fun.
When you have got your head around that. It would be worth adding the sticky throttle (Sticky T-Cut) to your setup. It has saved me a few times when I have pushed the throttle stick accidentally.
With the flaps down you might wish to add a little down elevator when they are selected... Play around with that in companion. You do it by adding another mix to the elevator channel.
I have a Skysurfer which is very much like the Bixler. On launching it, it has a tendency to head into the ground (due in part to the pusher configuration) if you don't give it a strong throw. My throw isn't all that good, so I have added a little up elevator (via a switch) for take off. That allows me enough time to get my hands back on the sticks. Just remember to switch it out at some point on the climb out.
Have fun.
Re: Template for Bixler2 with flaps?
Launching with both hands??Flaps 30 wrote:That allows me enough time to get my hands back on the sticks. Just remember to switch it out at some point on the climb out.
Have fun.
Or just launching with the wrong hand?? I use my throttle hand to launch. the other stays on the controls.
Of course, I prefer aircraft with some wheels, big ones if possible as I fly from grass, and a big powerfull engine to pull the aircraft up, vertical.. preference for a noisy one. And that's me sorted
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Template for Bixler2 with flaps?
One hand holds the TX... Other hand throws the model.. No wheels due to the added drag they create. The motors we use are powerful enough to climb at a good rate the we turn it off to glide gracefully searching for that lift that allows us to stay up for longer than the few minutes that other fliers have to put up with. Sorted!
Re: Template for Bixler2 with flaps?
well, I just fill the tank again and off I go.. I love doing touch and go's anyway, and other stuff that planes without wheels can't do
Oh, The only time I love gliding is when the motor stops
But what is this topic about again??
Oh, The only time I love gliding is when the motor stops
But what is this topic about again??
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Template for Bixler2 with flaps?
This is about a file for the Bixler 2 to include flaps, and let's say a bit of spoilerons thrown in to make it a CROW. Ohh.. Don't forget some down elevator compensation when they are activated. No GVARS please!!!
Re: Template for Bixler2 with flaps?
I have an easystar that is quite similar, but I did straighten the wing with a hair dryer and cut some ailerons in it..
When I apply flaperons, my plane doesn't suffer from that pitching up disease. Maybe because I slow the plane down first and then apply flaps slowly
João
When I apply flaperons, my plane doesn't suffer from that pitching up disease. Maybe because I slow the plane down first and then apply flaps slowly
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW