HK 450 Pro & 9XR

Post Reply
Blaze600
Posts: 2
Joined: Sat Mar 23, 2013 5:20 am
Country: -

HK 450 Pro & 9XR

Post by Blaze600 »

Hi Folks

I am getting no joy trying to setup my HK 450 pro with my new 9XR

I have done the following:

1) created a new Heli template
2) bound my Tx to my Orange Rx
3) Set it to straight 120 Degree setup
4) in the mixer menu I have found that :
i) The rudder is Ch4
ii) The gyro feedback is CH5
look from the tail towards the fron of the heli
iii) Ch3 is the front right ??Aleron??
iv) Ch6 is rear servo

None of the channels do the front left servo? I have gone through every channel and I get nothing....any help would be great

User avatar
kaos
Posts: 3247
Joined: Wed Dec 28, 2011 1:15 am
Country: United States

Re: HK 450 Pro & 9XR

Post by kaos »

er9x heli setup is totally different from 'normal' heli setup in an average Tx.
There is some coneceptual thing you need to get cleared 1st: here are some key features you need to understand to program cp heli in er9x/variant:
http://openrcforums.com/forum/viewtopic ... =510#p6129

here is something I wrote for myself a while ago learning the er9x and a complete template for a 120 degree cp heli. Hope this will help. ONce you understand the logic behind it, it is very simple.
Attachments
Heli setup model.eepe
(1.31 KiB) Downloaded 960 times
Er9x Heli setup guide for Dummies .rtf
(72.98 KiB) Downloaded 1147 times
Blaze600
Posts: 2
Joined: Sat Mar 23, 2013 5:20 am
Country: -

Re: HK 450 Pro & 9XR

Post by Blaze600 »

Kaos - thanks for replying I will get into it and let you know how I go :)

Post Reply

Return to “Helicoptor Programming”