DJT no longer fits the TH9
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: DJT no longer fits the TH9
Considering the number of units being shipped with this wired wrong / changed.. Maybe a useful option would be a global system preference that sets the reverse / normal state on all inputs.
The model option would still override this - but would sort out what the default should be?
Sent from my iPhone using Tapatalk
The model option would still override this - but would sort out what the default should be?
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: DJT no longer fits the TH9
One for all inputs won't work, because it's really an error, so depending on the unit you receive it's not the same inputs that are reversed
We'd have to store normal/reverse settings for every separate hardware input (maybe only the analogs, haven't read of reversed switches... yet)
We'd have to store normal/reverse settings for every separate hardware input (maybe only the analogs, haven't read of reversed switches... yet)
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: DJT no longer fits the TH9
I probably was not clear.
I was thinking a list of all inputs, with a norm/reverse option for each
Sent from my iPhone using Tapatalk
I was thinking a list of all inputs, with a norm/reverse option for each
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: DJT no longer fits the TH9
It's true that we have so much flash spare ... It's easy to do, but I will not be so happy to add such a function
What does Mike think about that?
Bertrand.
PS: I will think about a compilation option (at least for stock board), it will save flash and EEPROM
What does Mike think about that?
Bertrand.
PS: I will think about a compilation option (at least for stock board), it will save flash and EEPROM
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: DJT no longer fits the TH9
I think it is an added complication we could do without. It would also be likely to make using eepe files between radios confusing.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: DJT no longer fits the TH9
I ve got the same problem with my TH9 and the DJT module so I decided to do some dremel work to the extra plastic of the pins
then the DJT fitted nicely and firmly
then the DJT fitted nicely and firmly
-
- Posts: 29
- Joined: Sat Jan 26, 2013 5:35 pm
- Country: Spain
Re: DJT no longer fits the TH9
This is good stuff, just orderd a 9x and I'm sure mine will be like this. Looks like I need to go get a $5 cutter wheel to go into my Dewalt...
Re: DJT no longer fits the TH9
Alright, everybody stop with the power tools already All you need to do is trim that whole raised bit away with a sharp hobby knife, the plastic is really quite soft and cuts easily.
Cheers,
Geoff
Cheers,
Geoff
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: DJT no longer fits the TH9
Now you tell me! Now I have to return my 9x tx module tool.
Sent from my iPod touch using Tapatalk.
Sent from my iPod touch using Tapatalk.
Re: DJT no longer fits the TH9
Muahh ha ha ha
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: DJT no longer fits the TH9
I'm sorry, you guys are right.... do I have to turn in my man card now?
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: DJT no longer fits the TH9
It was just having a little fun.
SM
Sent from my iPod touch using Tapatalk.
SM
Sent from my iPod touch using Tapatalk.
Re: DJT no longer fits the TH9
Of course so was I, here I'll make it a bit more obvious....ShowMaster wrote:It was just having a little fun.
SM
Sent from my iPod touch using Tapatalk.
Cheers,gbmarsh wrote:I'm sorry, you guys are right.... do I have to turn in my man card now?
Geoff
Re: DJT no longer fits the TH9
Got a similar problem, but trying to fit my DJT module to a (very) old JR transmitter. The only way I can do it is to grind away the plastic on the module, but I can't figure out how to remove the circuit board from the module case. Is this possible, or do I just have to be very, very careful with the Dremel?
Thanks,
Ian
Thanks,
Ian
Re: DJT no longer fits the TH9
Squeezing the module sides a bit while pulling on the switch board normally works well. It can help not to pull straight.
-
- Posts: 29
- Joined: Sat Jan 26, 2013 5:35 pm
- Country: Spain
Re: DJT no longer fits the TH9
Well I did mine the other night, just used a pair of wire cutters and 10 seconds later was GTG. Obviously after I removed the circuit board. I'm also running a TelemetrEZ board so instead of running the wires out of the back of the radio and plugging into the DJT externally I made a hole in the DJT and ran the telemetry wires through the module bay into the radio. Everything is hidden and everything is working 100% I love this thing!