Broken Data after Flashing new FW
Broken Data after Flashing new FW
I have the Companion9X 1.07 build 1532 . I updated Companion and also Companion9X downloaded new FW for Sky9X. I went to reflash my radio, also I marked BackUp and restore EEPROM context. Everything went smoot, but when I powered Up radio it showed screen converting EEPROM and only Model Names stayed, all settings gone. So I tried open backUp file and its saying invalid file. So I try open OLD EEPROM only EEPROM saved for old Gruvin PCB I can Open, not EEPROM for ARM MC. I have to do whole setup againg.
Just my 2 cents...Wouldn't be good sit and design EEPROM structure and after that just updating FW? It is second time I have to do all again. Even I can't restore backups from SD Card. Or if the Format of EEPROM change put RED Warnings that it will screw EEPROM Data so check what you can do. Without that warning...For Now I'm not happy. I cannot restore anything prior this version.
Just my 2 cents...Wouldn't be good sit and design EEPROM structure and after that just updating FW? It is second time I have to do all again. Even I can't restore backups from SD Card. Or if the Format of EEPROM change put RED Warnings that it will screw EEPROM Data so check what you can do. Without that warning...For Now I'm not happy. I cannot restore anything prior this version.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Broken Data after Flashing new FW
Ok... But you can!
Best option to restore old settings is to
Do as follows.
1. Open the backup file in companion so you can see the models in the one window.
2. Download the empty config from the radio.
3. Drag and drop each model from old to new window.
That should do it?
Rob
Best option to restore old settings is to
Do as follows.
1. Open the backup file in companion so you can see the models in the one window.
2. Download the empty config from the radio.
3. Drag and drop each model from old to new window.
That should do it?
Rob
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Broken Data after Flashing new FW
Thank you. That's worked for models but not for system and calibration menu. But its less job as put all the models in. Thanks.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Broken Data after Flashing new FW
Best thing is to update often - that way you dont risk the firmware being too different!
Also.. double check all your models before flying! Never know if something has changed by accident!
Rob
Also.. double check all your models before flying! Never know if something has changed by accident!
Rob
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Broken Data after Flashing new FW
Quick tip, you can also drag the general settings from one file onto the other
Re: Broken Data after Flashing new FW
The problem is that only file from backup I can read is the one from gruvin9X. All other *.bin backups companion saying Invalid EEPROM File. So I cannot get the System settings for ER9X(ARM) only for Gruvin9X. I just saying that I cannot open any ARM backUp *.bin or *.eepe file, that why I'm not happy. But thanks for all inputs.
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: Broken Data after Flashing new FW
may you post some of those unreadable eproms here ?
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Broken Data after Flashing new FW
I think he means the sdcard backups?
I know these tend to go 'invalid' if you upgrade your epprom.
I know these tend to go 'invalid' if you upgrade your epprom.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Broken Data after Flashing new FW
Actually both, SD backups and also beackup from radio, I'll try upload one from yesterday
- Attachments
-
- august_25_2012_arm.zip
- Older one
- (3.15 KiB) Downloaded 225 times
-
- backup.zip
- Data from Radio before updating
- (4.09 KiB) Downloaded 228 times
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: Broken Data after Flashing new FW
Found something i have to fully understand, but I recovered almost all your models... (but model8)
Issue under inspection...
Issue under inspection...
Re: Broken Data after Flashing new FW
Thank you, great news.
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: Broken Data after Flashing new FW
Are you able to build companion by yourself ?
I can commit a fix, but I would like to discuss it with Bertrand before releasing a new executable.
I can commit a fix, but I would like to discuss it with Bertrand before releasing a new executable.
Re: Broken Data after Flashing new FW
I did try to compile, but showing still some errors, so some bad setup under Win7. Do not worry about that just for future refernces. I will work on the compiling later or you can send it to me by email compiled version. Or PM me link to download manually. Thanks for hard and fast work.
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: Broken Data after Flashing new FW
Try to open this one:
Re: Broken Data after Flashing new FW
Thank you Romolo, that one works as it suppose. Thank you for hard work.
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: Broken Data after Flashing new FW
Ok will be fixed in the next version of companion9x, sorry for the issue.