AVRDUDE...blank window

[balde38]

i wish i could share my eepe files of my models on this forum but... when i connect the transmitter to the pc and start reading memory, the window of
AVRDUDE opens,( the one with "AVRDUDE-Read EEPROM From Tx" written on it),... but no kind of "work" inside it...totally white and dead... Moreover,turning on the transmitter again, i realized that some mix have disappearerd !
Avrdude.exe is in the proper folder,...the transmitter is recognized by the pc , i use a SmartieParts programmer...
i've flashed the transmitter two months ago,taken the programmer out and put it back on few days ago...
so,... can anybody help me?
thank you. Gianluca, ITALY

[balde38]

problem solved ! using Companion9x instead of EEpe..

thank you very much to ROB THOMSON

[gohsthb]

In eepe if your avrdude window comes up blank it is usually an avrdude path problem. Check the path to avrdude in the burn->config settings menu.
-Gohst

[Rob Thomson]

problem solved ! using Companion9x instead of EEpe..

thank you very much to ROB THOMSON

Can't say I did much

[balde38]

maybe not much...but enough to allow me playing...

i checked the path of avrdude , and it looked correct, i mean, in the same polder of eepe...
anyway i took a look at companion, and all the program looks more complete...and it works!...
i just have to find the last version of er9x,the one with flight phases and telemetry (my dream is to use
the winged shadow altimeter i own and see the height on display,...is it possible?)
anyway,...thank you again!

[Rob Thomson]

You may want to consider open9x.

It is well tubed for gliders and supports the Winged Shadow system as a vario

[balde38]

open9x-stock-frsky-it.... is this the right one?

[Rob Thomson]

-it is the Italian one. If you are Italian, then yes


Sent from my iPhone using Tapatalk