open9x-r1439
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
open9x-r1439
[all]
- WSHH can be used as a vario (waiting for tests)
- Inactivity alarm bug fix (when > 10 minutes)
[stock]
- Voice Mod bugs fixes
- Flash savings
[gruvin9x]
- DBLKEYS option now ok
- SD Card Logs improvements
- SD Card Format function (in SD Manager, pressing [MENU Long] on the title)
- SD File Manager sorts files in alphabetical order
- Remanent Timers
[sky9x]
- Mass Storage !!!
- SD Card Logs
- SD Card Format function (in SD Manager, pressing [MENU Long] on the title)
- SD Card Information (type, sectors, speed, size)
- SD File Manager sorts files in alphabetical order
- Rotary encoder support
- When an alarm raises (consumption, temperature), it's displayed on the main screen in place of the Batt Voltage
- Remanent Timers
Bertrand.
- WSHH can be used as a vario (waiting for tests)
- Inactivity alarm bug fix (when > 10 minutes)
[stock]
- Voice Mod bugs fixes
- Flash savings
[gruvin9x]
- DBLKEYS option now ok
- SD Card Logs improvements
- SD Card Format function (in SD Manager, pressing [MENU Long] on the title)
- SD File Manager sorts files in alphabetical order
- Remanent Timers
[sky9x]
- Mass Storage !!!
- SD Card Logs
- SD Card Format function (in SD Manager, pressing [MENU Long] on the title)
- SD Card Information (type, sectors, speed, size)
- SD File Manager sorts files in alphabetical order
- Rotary encoder support
- When an alarm raises (consumption, temperature), it's displayed on the main screen in place of the Batt Voltage
- Remanent Timers
Bertrand.
Re: open9x-r1438
WOOHOO! thanks, i'll try it out tomorrow!bertrand35 wrote:[all]
- WSHH can be used as a vario (waiting for tests)
Re: open9x-r1438
Thanks for the new release! Here's some feedback on two [stock] issues that I had reported:
Voice interface data/clock timing: MP3 module's data setup time now meets manufacturer's recommendations.
Inactivity alarm >10 mins: Now correct, premature voice alert fixed.
- Thomas
Voice interface data/clock timing: MP3 module's data setup time now meets manufacturer's recommendations.
Inactivity alarm >10 mins: Now correct, premature voice alert fixed.
- Thomas
Re: open9x-r1439
It looks like I cannot load r1493. Everything seems ok while flashing but in the Tx (ersky9x) the old FW remains. I can flash r1335 and r1379 without problems.
My options are open9x-arm-symlimits-autoswitch-dblkeys-ttsen-en-r1439.
Any ideas? I'm pretty keen on the new functionalities!
regards manu
My options are open9x-arm-symlimits-autoswitch-dblkeys-ttsen-en-r1439.
Any ideas? I'm pretty keen on the new functionalities!
regards manu
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: open9x-r1439
You are on sky9x? I suppose you don't have the good zip for SAM-BA.
Hmmm.. where is it?
Bertrand.
Hmmm.. where is it?
Bertrand.
Re: open9x-r1439
is it the one in this post?
Thx Romolo, quick guy!
Thx Romolo, quick guy!
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: open9x-r1439
The load address for the co-processor applet is incorrect. I re-program my board so often, I'm still using a pre-production board with a '3S2 processor on it for most testing, I don't want to wear out the '3S4. The applets load at a different address on the '3S2.
The load and mailbox addresses should be the same as for the other applets.
Mike.
The load and mailbox addresses should be the same as for the other applets.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: open9x-r1439
ok, I copied the directory at91sam3s4-9x and the file boards.tcl into sam-ba_2.11 > tcl_lib
(saved the old ones).
While trying to flash I get this error:
---------------------------
File not found
---------------------------
Board Description File not found:
can't set "COPROCESSOR::appletAddr": parent namespace doesn't exist
---------------------------
OK
---------------------------
(saved the old ones).
While trying to flash I get this error:
---------------------------
File not found
---------------------------
Board Description File not found:
can't set "COPROCESSOR::appletAddr": parent namespace doesn't exist
---------------------------
OK
---------------------------
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: open9x-r1439
MikeB wrote:The load address for the co-processor applet is incorrect. I re-program my board so often, I'm still using a pre-production board with a '3S2 processor on it for most testing, I don't want to wear out the '3S4. The applets load at a different address on the '3S2.
The load and mailbox addresses should be the same as for the other applets.
Mike.
Thanks Mike, package updated
PS: I temporary reverted to old version. The coproc applet is there but not loaded
Last edited by Romolo on Sat Sep 29, 2012 9:02 am, edited 1 time in total.
Re: open9x-r1439
downloaded and installed the files from new, still get the same error:
---------------------------
File not found
---------------------------
Board Description File not found:
can't set "COPROCESSOR::appletAddr": parent namespace doesn't exist
---------------------------
OK
---------------------------
EDIT: Flashing works now.
---------------------------
File not found
---------------------------
Board Description File not found:
can't set "COPROCESSOR::appletAddr": parent namespace doesn't exist
---------------------------
OK
---------------------------
EDIT: Flashing works now.
Re: open9x-r1439
Thanks to all who have put all efforts in this project and even do, you are awesome!!
The mass storage functionality is a huge step forward.
Best regards
manu
The mass storage functionality is a huge step forward.
Best regards
manu
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: open9x-r1439
Thanks to Mike efforts, the file at the link previously posted has been updated to a fully working release including coprocessor.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: open9x-r1439
Romolo... Believe you are the main companion coder?Romolo wrote:Thanks to Mike efforts, the file at the link previously posted has been updated to a fully working release including coprocessor.
Do you think k it worth including an option in companion to install the correct tcllib files?
In theory it could be a simple prompt for the correct folder location... Then an install button.
That way you can update it easily?
Rob
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: open9x-r1439
No I'm not the main companion coder, just a member of the group...
I will try to see if is possible to handle an automatic install, but I foresee at least one issue:
an application running in user mode cannot write to a system dir, not at least on a barely serious operating system.
Furthermore makes little sense to install the applet at any upgrade, but also makes little sense to provide an automatic update procedure for something that normally is not updated too often...
But we will see.. I see something that still need to be updated in c9x, like resident timers. My priority goes there.
I will try to see if is possible to handle an automatic install, but I foresee at least one issue:
an application running in user mode cannot write to a system dir, not at least on a barely serious operating system.
Furthermore makes little sense to install the applet at any upgrade, but also makes little sense to provide an automatic update procedure for something that normally is not updated too often...
But we will see.. I see something that still need to be updated in c9x, like resident timers. My priority goes there.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: open9x-r1439
Lol... You do seem to do much of the companion coding
Maybe it needs to be a separate process that gets forked off with admin privileges?
However... Consider that it is possible for companion to download and reinstall an update for itself. A similar system might be employed to update the tcl lib?
RobT
Maybe it needs to be a separate process that gets forked off with admin privileges?
However... Consider that it is possible for companion to download and reinstall an update for itself. A similar system might be employed to update the tcl lib?
RobT
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: open9x-r1439
i tried using WSHH as a vario today. my vario settings are SOURCE=DATA, LIMIT=OFF/-1.00 (i also tried LIMIT=OFF/0.00).
chirps are slow when the plane is on the ground. chirps also get must faster when the airplane is climbing. both are expected, which is great.
however, i also hear chirps when the plane is descending (i believe that should not happen with LIMIT=OFF/0.00). perhaps the code treating LIMIT=OFF/0.00 same as LIMIT=0.00/0.00?. unfortunately, i did not get to try other LIMIT settings.
the altitude readings (in feet) are all correct, like ALT+ and ALT. btw, how does ALT- work?
thanks!
chirps are slow when the plane is on the ground. chirps also get must faster when the airplane is climbing. both are expected, which is great.
however, i also hear chirps when the plane is descending (i believe that should not happen with LIMIT=OFF/0.00). perhaps the code treating LIMIT=OFF/0.00 same as LIMIT=0.00/0.00?. unfortunately, i did not get to try other LIMIT settings.
the altitude readings (in feet) are all correct, like ALT+ and ALT. btw, how does ALT- work?
thanks!
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: open9x-r1439
If you are flying on slopes ALT- makes sense and fear too!!! (sometimes )noobee wrote:i tried using WSHH as a vario today. my vario settings are SOURCE=DATA, LIMIT=OFF/-1.00 (i also tried LIMIT=OFF/0.00).
chirps are slow when the plane is on the ground. chirps also get must faster when the airplane is climbing. both are expected, which is great.
however, i also hear chirps when the plane is descending (i believe that should not happen with LIMIT=OFF/0.00). perhaps the code treating LIMIT=OFF/0.00 same as LIMIT=0.00/0.00?). unfortunately, i did not get to try other LIMIT settings)
the altitude readings (in feet) are all correct, like ALT+ and ALT. btw, how does ALT- work?
thanks!
Re: open9x-r1439
I seem to be getting an output screen instead of a limit screen, I don't know why. but I can't set my inv without the limit screen.
Any Ideas?
Any Ideas?
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: open9x-r1439
tedbmoss wrote:I seem to be getting an output screen instead of a limit screen, I don't know why. but I can't set my inv without the limit screen.
Any Ideas?
What firmware options do you have selected on download?
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: open9x-r1439
You have PPMCA I think. As PPMCA takes some place on the screen, I reused the arrows column. So you only have to place the cursor on the arrow on the channel line and invert it.tedbmoss wrote:I seem to be getting an output screen instead of a limit screen, I don't know why. but I can't set my inv without the limit screen.
Any Ideas?
Bertrand.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: open9x-r1439
Exactly my thoughts...
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: open9x-r1439
ah, thanks for the explanation.Romolo wrote: If you are flying on slopes ALT- makes sense and fear too!!! (sometimes )
i think my understanding of the vario limit setting might be wrong. does LIMIT=OFF/0.0 also mean that the speaker will beep whenever the plane is descending? that would mean that i should set it to LIMIT=-7.0/0.0 or something.
also, i was poking around the source code (still don't really understand it) and am wondering if "&" below should be "&&"?
frysky.cpp:763
if((varioSpeedUpMin < 0) & (verticalSpeed >= varioSpeedUpMin)){
verticalSpeed -= varioSpeedUpMin;
thanks again for enabling wshh for the vario!
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: open9x-r1439
being the two terms between parentheses it's the same logical or binary AND operators makes no difference.
true&true evaluates as true && true
But conceptually you are right should be "&&"
true&true evaluates as true && true
But conceptually you are right should be "&&"
- Wimh
- Posts: 82
- Joined: Wed Dec 28, 2011 1:41 pm
- Country: Belgium
- Location: Vliermaal, Belgium
- Contact:
Re: open9x-r1439
I loaded this new version this afternoon, now my backlight is not working anymore, anybody have an idea why?
Wim
Belgium
Belgium
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: open9x-r1439
Is it still turned on in the system preferences?
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: open9x-r1439
I also prefer &&, I will change it.Romolo wrote:being the two terms between parentheses it's the same logical or binary AND operators makes no difference.
true&true evaluates as true && true
But conceptually you are right should be "&&"
Bertrand.
- Wimh
- Posts: 82
- Joined: Wed Dec 28, 2011 1:41 pm
- Country: Belgium
- Location: Vliermaal, Belgium
- Contact:
Re: open9x-r1439
As far as I can tell, yes. if you mean radio setup , I tried all modes: ON (even OFF) sticks, keys, both...Rob Thomson wrote:Is it still turned on in the system preferences?
The radio setup menu is also a bit weird, in that values seem to change right away, I mean without being selected by "menu" first...
Last edited by Wimh on Sun Oct 07, 2012 8:36 pm, edited 1 time in total.
Wim
Belgium
Belgium
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: open9x-r1439
If there is only one field in a line, it's not needed to press [MENU] to edit it. That's the global rule in open9x, and also er9x if I remember well!
Bertrand.
Bertrand.
Re: open9x-r1439
i tried wshh vario with LIMIT=-10.0/0.0 today and it works as expected: rapid chirps on thermal climbs as well as on significant descents. woohoo, again!
so i believe LIMIT=OFF/0.0 is not really "off" for descent but rather it is similar to LIMIT=0.0/0.0, which means start chirping when the altitude drops (or climbs). this would be useful if there was a different tone for down vs up.
thanks again for this feature. it was a blast flying around and hearing those lift chirps today.
so i believe LIMIT=OFF/0.0 is not really "off" for descent but rather it is similar to LIMIT=0.0/0.0, which means start chirping when the altitude drops (or climbs). this would be useful if there was a different tone for down vs up.
thanks again for this feature. it was a blast flying around and hearing those lift chirps today.