downloads er9x.com

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
pedroguimaraes
Posts: 11
Joined: Sun Jul 26, 2020 5:13 pm
Country: Brazil

downloads er9x.com

Post by pedroguimaraes »

Hi guys, can you tell me what's happening, I'm going to the website er9x.com to download the r226 for my turnigy 9x r pro radio, it's not working, in fact none of it is downloading and I've seen it for some time, has the location changed?

User avatar
MikeB
9x Developer
Posts: 18067
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: downloads er9x.com

Post by MikeB »

All working OK for me.
On 21 Jan 2024 the site was changed from http (insecure) to https (secure).

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: downloads er9x.com

Post by bob195558 »

Here is the updated address: https://www.er9x.com/
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
pedroguimaraes
Posts: 11
Joined: Sun Jul 26, 2020 5:13 pm
Country: Brazil

Re: downloads er9x.com

Post by pedroguimaraes »

MikeB wrote: Sat Feb 17, 2024 9:16 pm All working OK for me.
On 21 Jan 2024 the site was changed from http (insecure) to https (secure).

Mike
Ow ok, thanks Mike
pedroguimaraes
Posts: 11
Joined: Sun Jul 26, 2020 5:13 pm
Country: Brazil

Re: downloads er9x.com

Post by pedroguimaraes »

bob195558 wrote: Sun Feb 18, 2024 12:00 pm Here is the updated address: https://www.er9x.com/
Thanks

hmeijdam
Posts: 3
Joined: Fri Sep 01, 2017 6:43 pm
Country: -

Firmware version ER9X (revision 821)

Post by hmeijdam »

For an old TGY9x with M64 processor I downloaded the HEX firmware http://www.er9x.com/er9x.hex

I expected to see version 821, however when I look at the version after flashing it, the screen shows V820

Image
TGY 9X FW version.jpg
(3.68 MiB) Not downloaded yet
Or am I missing something?
User avatar
MikeB
9x Developer
Posts: 18067
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: downloads er9x.com

Post by MikeB »

I did make a mistake on that release and it shows 820 instead of 821.
The date and time tell me it is 821.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “er9x”