Hello,
where can i buy such buttons for Turnigy 9x?
I can't find it anywhere, is it possible that they fit from another transmitter (frsky, etc.)?
Turnigy 9x trim buttons
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9x trim buttons
I've had a small number of (similar) trim rockers break on other radios. I've repaired them by gluing the broken pieces back on and adding triangular reinforcements above the pieces. These were made from polystyrene card (40 thou thick) and also glued in place. These have then worked OK.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Turnigy 9x trim buttons
Ok, I'll glue it. Thanks!