Taranis X9D+ not binding

Cant get your radio to work? General Hardware issues?
Post Reply
pekote
Posts: 7
Joined: Sat Apr 18, 2015 4:03 am
Country: Argentina

Taranis X9D+ not binding

Post by pekote »

I forgot my Taranis X9D+ turned ON during nigth, I found it next morning doing a strange noise from speaker like battery low malfunction, so I turned OFF and put it to charge. Next day the radio lost all my binded planes. I tried to re bind all planes but it was not possible. I have several receivers, X4D, D6R, and others. It was not possible to bind nothing. What can I do? Is it possible that the RF module isd amaged?

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Taranis X9D+ not binding

Post by Kilrah »

Yes it's possible, pretty sure I've heard of this happening before.
pekote
Posts: 7
Joined: Sat Apr 18, 2015 4:03 am
Country: Argentina

Re: Taranis X9D+ not binding

Post by pekote »

I'm happy, I was able to solve the problem.
I updated firmware from internal RF module, and started to work. Just in case, take care to install old version from firmware due to the new version only work for X type receivers. This is really bad from frsky!!!!!!!!! I have several Dx type receivers and worked really well.

Post Reply

Return to “Hardware”