Horus 2.4 & MHZ Redundancy & Sbus to Pwm

Hardware help and support for the FrSky Horus. (not yet released)
Post Reply
User avatar
youngstar
Posts: 32
Joined: Wed May 06, 2020 1:37 pm
Country: United Kingdom

Horus 2.4 & MHZ Redundancy & Sbus to Pwm

Post by youngstar »

Hope this is helpfull but its the only way I find it works perfectly.
Provides the dual redundancy with the sbus/pwm converter working fine.
For extra safety cross the plane functions on each receiver such as left Aileron on Ch1 RX 1
Right Aileron CH2 on RX2. Same for Elevator other channels dont bother!
Any feedback welcome.
Image
Attachments
Redund-pwm.jpg

User avatar
youngstar
Posts: 32
Joined: Wed May 06, 2020 1:37 pm
Country: United Kingdom

Re: Horus 2.4 & MHZ Redundancy & Sbus to Pwm

Post by youngstar »

Hi, Please Ignore the earlier image with In and Out SBus this is not Incorrect. The single connection is correct for custom Fail safe to work correctly. The 2.5 is a typo should be on picture 2.4 !

Image
Attachments
Hi, Please Ignore the earlier image with In and Out Incorrect. The single connection is correct for custom Failsafe to work correctly.
Hi, Please Ignore the earlier image with In and Out Incorrect. The single connection is correct for custom Failsafe to work correctly.
Redund-pwm.jpg (135.35 KiB) Viewed 2036 times
Post Reply

Return to “FRSky Horus radio”