Hi,
I am quite new to this field and I have a problem.
I searched for bricked firmware topics in the forum, but I could not find any answer to my question.
I have a FrSky Taranis X9D (ACCST) and I updated firmware from SD-card. Now it doesn't show anything on the screen. When I switch on, "welcome to opentx" audio is played, but nothing on the screen.
Fortunately, I can power it on in bootloader mode. It has a bootloader version 2.2.3 and shows current version as opentx-x9d+-2.2.2 (I think I upgraded X9D+ not X9D)
First question: There are many Taranis X9D models. Which one do I have, I don't know. How can I determine my model? Ist it X9D or X9D+ or X9D SE 2019 or X9D+ SE 2019?
Is there any difference between those models?
Which file is the exact one to be downloaded? I tried almost every file on frsky webpage.
Nothing helped.
Thanks.
FrSky Taranis X9D firmware Upgrade problem (yet another)
-
- Posts: 1
- Joined: Sat Sep 17, 2022 5:47 pm
- Country: -
Re: FrSky Taranis X9D firmware Upgrade problem (yet another)
X9D+ has "Plus" written on the screen bezel. 2019 has an ACCESS logo on it. If it has nothing it's a plain X9D.
-
- Posts: 277
- Joined: Sun May 06, 2012 8:37 pm
- Country: -
- Location: Fond du Lac, WI
Re: FrSky Taranis X9D firmware Upgrade problem (yet another)
I have both an original x9d and a 2019 SE. I run Companion for each on two different computers to keep things straight. The x9d has been relegated to D-8 and Spektrum receivers.