Driver Taranis controller not recognized by Windows 10

Cant get your radio to work? General Hardware issues?
Post Reply
jobonten2022
Posts: 1
Joined: Wed Apr 06, 2022 11:19 am
Country: -

Driver Taranis controller not recognized by Windows 10

Post by jobonten2022 »

hi,

I have a license for Velocidrone, but I cant get to run my Taranis controller properly.
I run Windows 10.

The first time Velocidrone recognized my Taranis controller, but only partially (I was only able to go left and right and that's it).

I de-installed the drivers.
Updated them.

No luck.

I tried all this:
https://www.open-tx.org/2013/07/18/tara ... stallation
https://steamcommunity.com/app/410340/d ... 480593912/
https://old.reddit.com/r/Multicopter/co ... c/d8utshj/
https://www.rcgroups.com/forums/showthr ... Windows-10

I know it's a common problem with Windows 10 and the Taranis controller drivers.

But I couldnt get it to work.
Now my OS doesn't recognize the controller at all.
Can someone connect to my pc (with remote desktop) and help me to install it?

I'm willing to pay for this to get it to work.. because I'm out of options myself :(

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Driver Taranis controller not recognized by Windows 10

Post by Kilrah »

Have you made sure the USB mode is set to Joystick?

Did you check in the Joystick control panel that it was detected? Are things moving there?
jobonten2022 wrote: Wed Apr 06, 2022 11:23 am The first time Velocidrone recognized my Taranis controller, but only partially (I was only able to go left and right and that's it).
It can't be recognised "partially" and be a connection/driver problem, either it's there or it's not. As long as it's seen then the connection is good and the issue is either with radio or simulator mixing/configuration.
Post Reply

Return to “Hardware”