Frsky telemetry

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
flye
Posts: 2
Joined: Sat Jun 30, 2012 3:21 pm
Country: -

Frsky telemetry

Post by flye »

I have a fsth9x modified with dht toggle and a d8rxpsince a week now.
For now I would like to understand how rssi work
I use ER9x-FRSKY-NOHT and I have some unstable problem .Reflashed a few times to correct that
I have made a small fpv flight yesterday and got alarm at 50 feets
Back to home I looked at screen10 and here is what I got
Image
Is it where I adjust rssi?

User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Frsky telemetry

Post by Rob Thomson »

Have you actually done the telemetry mods?


---
I am here: http://tapatalk.com/map.php?kuvvdc
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
flye
Posts: 2
Joined: Sat Jun 30, 2012 3:21 pm
Country: -

Re: Frsky telemetry

Post by flye »

No.I need to do that to use rssi from dht?
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: Frsky telemetry

Post by ShowMaster »

The 9x stock will not display telemetry on the LCD without many circuit modifications that can be found on this fourm. The DHT Toggle will display all Frsky telemetry if a Frsky FLD-02 is plugged into the DHT Toggle data pins on the side of the shrink wrap. The FLD-02 can be mounted to the front of the 9X case where it can be viewed.
SM

Post Reply

Return to “er9x”