From the Rev 0.4 schematic:
R419 - 220 ohm
R418 - 220 ohm
R101 - 7.5K
R102 - 3.6K
C123 - 100nF
Mike
Q X7 Schematic; how to find it on ORCForums?
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Q X7 Schematic; how to find it on ORCForums?
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Q X7 Schematic; how to find it on ORCForums?
Hi,
I’m looking to change the part c125 but have no clue about the reference and the specifications about this component is there any one who knows about them
Regards
I’m looking to change the part c125 but have no clue about the reference and the specifications about this component is there any one who knows about them
Regards
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Q X7 Schematic; how to find it on ORCForums?
4.7uF 16V, according to the schematic I have for the Rev. 0.4 motherboard. It is polarised so needs to be fitted the correct way round.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Q X7 Schematic; how to find it on ORCForums?
Thank you it shouldn’t be polarised it’s an smd 0805 I will put attachment for the picture to be sure I don’t want to mess it up
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Q X7 Schematic; how to find it on ORCForums?
I just saw a large + sign beside C125, so assumed it was polarised, but I now see there is a + sign beside most of the capacitors. The actual polarised ones do have a different symbol, so C125 is not polarised (I guess it is a ceramic cap).
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Q X7 Schematic; how to find it on ORCForums?
Thank you for the answer I will get some capacitor and do the job thank’s for the help
Re: Q X7 Schematic; how to find it on ORCForums?
Anyway I can get specs on U101 qx7.. my radio doesn’t work and U101 get extremely hot within seconds