Hello,
I have a Radioking TX18S. I have problems with updating the firmware/copying safed models back to the radio.
In all the Firmware updates Radioking is not mentioned as supported Radio. It looks like a Radiomaster TX16s, but has one button less (page back). In another thread here (viewtopic.php?f=98&t=12963&p=151765&hil ... ng#p151765) I read that it is internally the same as an Jumper T18.
Attached is a screenshot with the choices of Radios OpenTx is giving me. Which radio should I choose?
Thanks,
spcboarder
Radioking - which Radio Type for Firmware?
-
- Posts: 7
- Joined: Wed Jun 16, 2021 4:12 pm
- Country: Austria
Radioking - which Radio Type for Firmware?
- Attachments
-
- Radio choices.png
- (106.17 KiB) Not downloaded yet
-
- Posts: 313
- Joined: Thu Dec 29, 2011 10:18 am
- Country: Australia
- Location: Cooloola Cove, Australia
Re: Radioking - which Radio Type for Firmware?
It is a Jumper T18 clone so just select that and all will be ok. I have a Radioking TX18s and it worked for me, when I upgraded to Open-Tx 2.3.11. Enjoy the radio.
-
- Posts: 7
- Joined: Wed Jun 16, 2021 4:12 pm
- Country: Austria
Re: Radioking - which Radio Type for Firmware?
Thanks suncoaster!
I selected the Jumper T18 and I could bring back my safed models
BR, spcboarder
PS: so far this radio is giving me some headaches. I hope I will solve thes issues. I hope you guys from the forum can help me out on my further challenges as well!
I selected the Jumper T18 and I could bring back my safed models
BR, spcboarder
PS: so far this radio is giving me some headaches. I hope I will solve thes issues. I hope you guys from the forum can help me out on my further challenges as well!
Last edited by spcboarder on Fri Jun 18, 2021 9:06 pm, edited 1 time in total.
-
- Posts: 7
- Joined: Wed Jun 16, 2021 4:12 pm
- Country: Austria
Re: Radioking - which Radio Type for Firmware?
Unfortunately the Firmware for a Jumper TX18 does not work. There I get a
"WrongPCBdetected Error".
I downloaded Firmware: Jumper T18-6-12-2.3.8V0027.bin
However, I just updated the Jumper software to 2.3.12 and now my Radio seems to work and I even get the DSM X11ms Protocol, which (I hope) will be the key for binding to Spektrum (DSMX) receivers.
Br, spcboarder
"WrongPCBdetected Error".
I downloaded Firmware: Jumper T18-6-12-2.3.8V0027.bin
However, I just updated the Jumper software to 2.3.12 and now my Radio seems to work and I even get the DSM X11ms Protocol, which (I hope) will be the key for binding to Spektrum (DSMX) receivers.
Br, spcboarder
- Attachments
-
- WhatsApp Image 2021-06-18 at 23.03.44.jpeg
- (51.83 KiB) Not downloaded yet
-
- Posts: 1
- Joined: Fri Aug 20, 2021 11:20 am
- Country: -
Re: Radioking - which Radio Type for Firmware?
does tx18s have firmware support on opentx and edgetx ?
Re: Radioking - which Radio Type for Firmware?
OpenTX no, EdgeTX no idea.