Hello RC heroes,
Need some help. Has been googling but no answer found, hope someone can help me out.
Recently i bought the Horus x10s mode 2( throttle left side, non EU).
Issue:
When select mode 2, it does not work as it should : roll works from left throttle stick (in mode 2 it should be YAW), and YAW works from right pitch stick( in mode 2 that should be roll/aileron).
But when select Mode 4 everything works ok.
Everything else working ok. Throttle and pitch working as it should.
More: this issue happening in all three aurdupilot, betaflight & cleanflight where in Ardupilot i can fix the issue by mapping the channel.
At the beginning i though its a opentx BUG. I have googled it and found nothing about this mode BUG.
Any help would be highly appreciable.
Horus X10s Mode Issue Please HELP
Re: Horus X10s Mode Issue Please HELP
Your issue is likely not mode but the wrong order used for the channels in the mixer.
Re: Horus X10s Mode Issue Please HELP
Strange.
What order it should be ? AETR.
And Yes, i am using R9m on transmitter. ( If it makes any difference).
MOre,
My input, mixer and output order are: RUD, ELE,THR, AIL
What order it should be ? AETR.
And Yes, i am using R9m on transmitter. ( If it makes any difference).
MOre,
My input, mixer and output order are: RUD, ELE,THR, AIL
Re: Horus X10s Mode Issue Please HELP
Please mark this thread as resolved.
Cannt believe it such a easy fix. I just changed the order to AETR in input, mixer and output and its working as it should.
Thanks for your kind help "Kilrah"
Cannt believe it such a easy fix. I just changed the order to AETR in input, mixer and output and its working as it should.
Thanks for your kind help "Kilrah"
Re: Horus X10s Mode Issue Please HELP
Only the mixer needs changing. Inputs have no order.