Is it permissible to use the Smart port, RSSi port or the SBUS port for power input? (X8R ACCST)
Thank you,
Dix
Receiver power
Re: Receiver power
Only if you have few and small servos as the power would have to go through thin tracks all across the receiver.
Re: Receiver power
OK,if you use all 8 channels, how do you power receiver?
Re: Receiver power
"Y" servo lead?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Receiver power
Or the other 2 connections that are on the same side as the servo plugs... SBUS and RSSI are better, smart port is not.
Re: Receiver power
Good to know Kilrah
I was wondering if you could power these receivers by using the non servo interfaces. But didn't want to do a thirty dollars test
I understand the s bus and smart port, what is the RSSI ports function?
I was wondering if you could power these receivers by using the non servo interfaces. But didn't want to do a thirty dollars test
I understand the s bus and smart port, what is the RSSI ports function?