Still didn’t work for me in TapaTalk but was OK if I went to Web View within TT.jhsa wrote:Please try now.. Link updated.. Second video of the playlist. Maintenance and bootloader modes
João
Good stuff, worth watching. Thank you.
Still didn’t work for me in TapaTalk but was OK if I went to Web View within TT.jhsa wrote:Please try now.. Link updated.. Second video of the playlist. Maintenance and bootloader modes
João
I'll look into that restart problem. I have noticed it on odd occasions myself. I think I've got out of it by holding the horizontal trims apart, so entering maintenance mode, then powering off from there.thweekender wrote: ↑Sun Dec 17, 2017 4:57 pmFinally any ideas on that restart bug I described. It hasn't happened again because I'm being careful to hold down the power button until it boots up, but I'm just thinking if it's a software bug? Are you guys continuing development on the ersky9x firmware for TARANIS?
Good to hear, looking forward to the fixed version. Speaking of versions, is there a difference between the ersky9xProvR221f7.zipMikeB wrote: ↑Mon Dec 18, 2017 12:26 am Templates are working for me on the QX7, but (currently) you have to use the MENU button (centre button on the left) to apply them. You get a haptic buzz when a template is actioned.
I can create the power cycling problem, so I should be able to find the fix.
Mike.
Yes definitely related to the SD card, as it only happens when the SD card is inserted.MikeB wrote: ↑Mon Dec 18, 2017 11:55 pm The power problem may take a few days to sort. I've got one change that improves things, but I can still get the problem. It is almost certainly a watchdog reset, possibly, from one report above, due to waiting for the SD card that isn't initialising under this condition.
Mike.
Thanks for the update Mike, I wonder if this is caused by a specific SD card or is this a generalized issue? How does openTX deal with unresponsive SD cards?
Hi Mike, happy new year, when do you think the fixed version of the frimware will be available?MikeB wrote: ↑Wed Dec 20, 2017 12:05 am OK, I think I have this all fixed now. The problem was the SD card was being initialised before the wait with "STARTING" displayed. If you release the power button, then press it again, the card thinks it is initialised, but the firmware tries to initialise it again, and fails, so the firmware and the SD card are out of sync.
The solution is to move the SD initialise to after the end of the "STARTING" time.
I now cannot get the radio into the power cycling mode, and the SD card starts OK every time.
I've also got the encoder button applying the templates.
Hopefully I'll post an update tomorrow, but I just need to do some more testing as I also have a change in on how timer interrupt flags are cleared. We discovered a problem on the Multi module, the fix for which should be applied to ersky9x and openTx.
Mike.
Mike, is it still necessary to download the different eepskye.exe in order for it to work with the x7? Or will eepsky 422 work as is?MikeB wrote: ↑Thu Aug 03, 2017 5:12 pm For the QX7 you need ersky9x, not er9x, latest test versions are here: http://openrcforums.com/forum/viewtopic.php?f=7&t=4676.
Yes, download eepskye. Go here: http://www.er9x.com/, and download from "eepe and eepskye for Windows" and install it.
Next go to the test versions link above and download "eepskye.zip" dated 14-Jul-2017 14:46. Unzip the file and copy the eepskye.exe from it to the eepe install directory.