Schematics for 9XR
Schematics for 9XR
I can´t find any schematics for the 9XR.
Anyone else know something?
And what kind of lcd will suit the motherboard?
Best regards , Hasse.
Anyone else know something?
And what kind of lcd will suit the motherboard?
Best regards , Hasse.
Last edited by Hasse.69 on Sun Jul 28, 2013 9:43 am, edited 1 time in total.
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Schematics for 9XR
The LCD on the 9XR has a unique connection , the 9x LCD or the optrex LCD , have slightly different connections for
the LCD charge pump driver. , I do not know of any direct replacements...
I'll ask HK if they plan on selling them separate.
-Brent
the LCD charge pump driver. , I do not know of any direct replacements...
I'll ask HK if they plan on selling them separate.
-Brent
Re: Schematics for 9XR
Hi Brent!
i´ve seen some guys discussing it in the discussion thread below the product.
Jepp i threw myself into it toooooo
i´ve seen some guys discussing it in the discussion thread below the product.
Jepp i threw myself into it toooooo
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Schematics for 9XR
Now i got an answer from Skyfox60.
He says that if you search ebay for:
(12864 128X64 Graphic ( COG ) LCD Module Display / LCM)
The sellers nick is egochina8848
It´s listed for 12.80$
Then you will find a LCD with the right properties but wrong size ,a tiny bit.
The wires for the backlight also needs to be swapped.
Any comments , thoughts , anyone , Brent
Best to all of you , Hasse.
He says that if you search ebay for:
(12864 128X64 Graphic ( COG ) LCD Module Display / LCM)
The sellers nick is egochina8848
It´s listed for 12.80$
Then you will find a LCD with the right properties but wrong size ,a tiny bit.
The wires for the backlight also needs to be swapped.
Any comments , thoughts , anyone , Brent
Best to all of you , Hasse.
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Schematics for 9XR
Hi ,
You need a LCD that will work with this pinout Pin 1 location is not standard on all ribbon cables , also you need the contacts facing down.
-Brent
You need a LCD that will work with this pinout Pin 1 location is not standard on all ribbon cables , also you need the contacts facing down.
-Brent
Re: Schematics for 9XR
If we could get a spare connector of that type, that is used on the Tgy9x board, shouldn't we be able to unsolder the 'wrong' connector and resolder the correct one? (similar to changing the CPU). And use the spare displays that are available for the Tgy9x.
But how is such a connector called and where to find?
Reinhard
But how is such a connector called and where to find?
Reinhard
Re: Schematics for 9XR
The stock 9x lcd will not work , the pin out is slightly different
Re: Schematics for 9XR
Some news in rcforums from Feddo.
http://www.rcgroups.com/forums/showpost ... tcount=741
http://www.rcgroups.com/forums/showpost ... tcount=741
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Schematics for 9XR
How the hell you guys find these things out? Well done.. Is that a schematic from the 9XR on the table?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Schematics for 9XR
More info here: (viewtopic.php?f=99&t=10231&p=128945#p128945)
and (viewtopic.php?f=95&t=10237).
Bob B.
and (viewtopic.php?f=95&t=10237).
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: Schematics for 9XR
It looks easier to me just cut 0.5mm from the flat cable (as the last pin is not used) and just shift the flat cable rather than moving the connector...