WANTED: Turnigy 9xr pro gimbal
WANTED: Turnigy 9xr pro gimbal
Hi all. I need one self centering gimbal for the turnigy 9xr pro.
They are out of stock at hobbyking and no clue when it will be available again.
They are out of stock at hobbyking and no clue when it will be available again.
https://radindustries.wordpress.com/
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: WANTED: Turnigy 9xr pro gimbal
Hi Rad,
I may have what you need, but I will need to check to see what I have.
If no one else comes up with one before next Tuesday,
Then I will let you know if I have one.
Also check out this for more info "Search for Replacement 9x Potentiometers!": (viewtopic.php?f=95&t=2974&hilit=Search+for+9x+Pot)
and (viewtopic.php?f=95&t=2974&start=150#p54150)
and "9XR-PRO - better gimbals" (viewtopic.php?f=122&t=6501#p127324)
and "Hall sensor gimbals for the 9xr-pro" (viewtopic.php?f=122&t=9964).
Bob B.
I may have what you need, but I will need to check to see what I have.
If no one else comes up with one before next Tuesday,
Then I will let you know if I have one.
Also check out this for more info "Search for Replacement 9x Potentiometers!": (viewtopic.php?f=95&t=2974&hilit=Search+for+9x+Pot)
and (viewtopic.php?f=95&t=2974&start=150#p54150)
and "9XR-PRO - better gimbals" (viewtopic.php?f=122&t=6501#p127324)
and "Hall sensor gimbals for the 9xr-pro" (viewtopic.php?f=122&t=9964).
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: WANTED: Turnigy 9xr pro gimbal
Hi mate. The problem about my radio is my son dropped the radio to the floor, and one of the gimbals died. I bareable fixed it, but sometimes the gimbal, sticks and while no catastrophic (Im with RC tanks, no planes, so nothing will fall and crash, lol) its annoying.
If you have both gimballs it might be a good idea to buy the two from you, just in case some disaster happens again. I am living in Austria, so shipping from the US might be very pricey, but we can talk about it.
I considered installing taranis gimballs, but I think for what we do we just dont need them, and also I am worried about my lack of skill installing them, but if really worths the time and price I might give it a try.
Please in case I forget to write you back next week, please send me an email to [email protected]
Thanks!
EDIT: I took another look to installing taranis gimbals in the 9xr pro, and definitelly the sanding part is not for me, lol. But just curious, do the taranis gimballs fit the Flysky 9x with no surgery mods? Im using a 9xtreme board.
If you have both gimballs it might be a good idea to buy the two from you, just in case some disaster happens again. I am living in Austria, so shipping from the US might be very pricey, but we can talk about it.
I considered installing taranis gimballs, but I think for what we do we just dont need them, and also I am worried about my lack of skill installing them, but if really worths the time and price I might give it a try.
Please in case I forget to write you back next week, please send me an email to [email protected]
Thanks!
EDIT: I took another look to installing taranis gimbals in the 9xr pro, and definitelly the sanding part is not for me, lol. But just curious, do the taranis gimballs fit the Flysky 9x with no surgery mods? Im using a 9xtreme board.
https://radindustries.wordpress.com/
Re: WANTED: Turnigy 9xr pro gimbal
The taranis gimbals fit the 9x radio. I have them in most of my 9x radios
João
Sent from my thor using Tapatalk
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: WANTED: Turnigy 9xr pro gimbal
Hi Joao, is it a straight fit or do I need to sand, grind, and make new holes on the taranis gimbals?
I can not find any video or tutorial fitting them in a 9x, but there are some for the 9xr pro.
https://radindustries.wordpress.com/
Re: WANTED: Turnigy 9xr pro gimbal
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: WANTED: Turnigy 9xr pro gimbal
New great photos of M9 Gimbals modded into the 9XR-Pro radio: (viewtopic.php?p=130689#p130691).
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: WANTED: Turnigy 9xr pro gimbal
Hi Joao, definitelly that's an easy job. I might do it, thanks for sharing
https://radindustries.wordpress.com/
Re: WANTED: Turnigy 9xr pro gimbal
Hi mate, Im afraid I have no way to cut those metal gimbals and also are very pricey. Id stick buying your old 9xr pro gimbals, lol.bob195558 wrote: ↑Sun Aug 06, 2017 11:51 pm New great photos of M9 Gimbals modded into the 9XR-Pro radio: (viewtopic.php?p=130689#p130691).
https://radindustries.wordpress.com/
Re: WANTED: Turnigy 9xr pro gimbal
That is for the old taranis gimbals, not the M9 ones. You know that, right?
Sent from my thor using Tapatalk
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: WANTED: Turnigy 9xr pro gimbal
Yep, for this ones, right? https://hobbyking.com/en_us/frsky-repla ... itter.html
The new m9 ones has metal and looks hard to mod, but the taranis ones looks like almost and straight fit on the 9x.
In the Pro is another story. Hope bob finds his gimballs at home...
https://radindustries.wordpress.com/
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: WANTED: Turnigy 9xr pro gimbal
Hi Rad,
I found where I had placed the box of new and old Gimbals.
I believe the 9XR-Pro and the older 9XR radios use the same Gimbals.
If I remember correctly, they were sold as 9XR replacement Gimbals.
I had purchased them for the pots in them to use them as replacement pots in the 9x radios.
I have 5 new 9XR Gimbals ($5.00 US for each), how many do you want ?
Bob B.
I found where I had placed the box of new and old Gimbals.
I believe the 9XR-Pro and the older 9XR radios use the same Gimbals.
If I remember correctly, they were sold as 9XR replacement Gimbals.
I had purchased them for the pots in them to use them as replacement pots in the 9x radios.
I have 5 new 9XR Gimbals ($5.00 US for each), how many do you want ?
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: WANTED: Turnigy 9xr pro gimbal
I think you guys should start PM'ing (Private Messaging) each other with the details
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: WANTED: Turnigy 9xr pro gimbal
Private message answered, thanks to everyone.
https://radindustries.wordpress.com/
-
- Posts: 3
- Joined: Mon Oct 16, 2017 4:08 pm
- Country: -
Re: WANTED: Turnigy 9xr pro gimbal
I know I am new here, but I saw this post about replacement gimbals for a TURNIGY 9XR. I wanted to make both gimbals self centering.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: WANTED: Turnigy 9xr pro gimbal
Does not look like, that I can see, the Throttle/Rudder Gimbal can be changed by just adding a spring to return stick back to center.
I think you would need a spring and some hardware to change the Throttle/Rudder Gimbal into a self centering Ail/Ele Gimbals (Mode 2).
I only had one self centering Gimbal, but I do still have several new 9XR Throttle/Rudder Gimbals, sorry.
Bob B.
I think you would need a spring and some hardware to change the Throttle/Rudder Gimbal into a self centering Ail/Ele Gimbals (Mode 2).
I only had one self centering Gimbal, but I do still have several new 9XR Throttle/Rudder Gimbals, sorry.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).