I'm making use of the bad weather - I bought 4 new planes this week, to replace a few old ones and move up (and out wider) in my flying level - I now have a few 'rainy day' projects at hand
Again, many thanks - and to João for his input, comments, support, feedback.
regards,
ozphoenix
MikeB wrote: ↑Fri Oct 13, 2017 1:06 pm I've posted "f2". There are a couple of noticeable changes. On the main screen I've used the slightly smaller large font for the model name. This then provides some space at the top right where I've now put the time of day and the volume as a graphic. These have been on the Taranis, with the wider display, for some time. I may change what is displayed there at some point, but I thought I'd try this out.
There is also a new feature on Atmel processor based transmitters, which has taken most of my time for the last week. USB joystick to a PC should now be available, just start the radio normally, then plug the USB in and a joystick device (game controller) should appear on the PC.
As with the implementation on STM based transmitters, channels 1 to 8 are sent as analog values. Channels 9 to 16 are 8 switches, if a channel output is greater than 0 (centre), then the switch is ON.
The changes to global voice alerts I mentioned 4 post back are also included.
I may now find a bit more time for other things, including building a new aircraft!
Mike.