Hi burbulence,burbulence wrote: ↑Fri Aug 04, 2017 10:13 am I have a DJT module with this modification without the level converter in my 9x modded to receive the FrSky telemetry on screen which works perfectly.
Ive just purchased the Taranis which now has this ridiculous EU LBT restriction on it so the internal XJT will not communicate with my older D or V series receivers.
Is it possible to use the external DJT module in the Taranis so I don't need to upgrade all my receivers straight away ?
Also if the module is safe to use is it also possible to display the D series telemetry on the Taranis also.
Thanks for any advice.
Yes, when using erSky9x on Taranis firmware you can set an external DJT module to use PPM protocol
and make a cable to connect externally the Telemetry from com2. (http://www.er9x.com/)
I use for more flexibility the XJT module and by changing the dip switches you can change the XJT into a DJT module.
See here about making the Telemetry Cable: (viewtopic.php?f=96&t=4393&start=60#p79427)
and here about erSky9x on Taranis: (viewtopic.php?f=7&t=4582&start=150#p94504).
Also some more info when using erSky9x on Taranis with XJT and DJT modules
with telemetry connections and settings: (viewtopic.php?f=7&t=4582&start=150#p94519).
I have always used the external telemetry cables, so I am not sure when using the external DJT module
when using PPM protocol, works with internal telemetry connections.
FrSky external DJT module Mod for internal Telemetry connection
(this mod makes it safe to use in the Taranis): (viewtopic.php?f=95&t=3868&p=57121&hilit=#p57047).
Bob B.