HI i just had a question regarding using the DHT DIY module with the original smartieboard in a Turnigy 9X. It is running ER9X and has the backlight installed.
Where do i connect the telemetry, I dont thave the smartieboard telemetryEZ which is no longer available and was hoping to do it without it?
Do i still connect it up the same as if i didnt have the smartieboard??
Thanks in advance for anyhelp!!
FrSky DHT DIY telemetry mod with original smartieboard
Re: FrSky DHT DIY telemetry mod with original smartieboard
Yes, you would still have to do the telemetry mod as explained in the wiki..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: FrSky DHT DIY telemetry mod with original smartieboard
Thanks!
is this the correct link for the mod?
http://openrcforums.com/wiki/index.php/ ... _telemetry
also found this youtube video
https://www.youtube.com/watch?v=pUdJwiltog0&t=115s
ignoring the parts other than the diy frsky mod, theres part 2 also but seems very detailed and easy to follow. He however does not use the resistors..
I have a few questions regarding thes mods, since we reroute the THR and AIL switches does it make these no longer usable?
and why do some mods use a 220ohm resistor between pins 7 and 8 and the resistors and some dont?
Thanks again!
is this the correct link for the mod?
http://openrcforums.com/wiki/index.php/ ... _telemetry
also found this youtube video
https://www.youtube.com/watch?v=pUdJwiltog0&t=115s
ignoring the parts other than the diy frsky mod, theres part 2 also but seems very detailed and easy to follow. He however does not use the resistors..
I have a few questions regarding thes mods, since we reroute the THR and AIL switches does it make these no longer usable?
and why do some mods use a 220ohm resistor between pins 7 and 8 and the resistors and some dont?
Thanks again!