Hello everybody,
I have installed in my Turnigy 9X the 9Xtreme board. I have the DYI Frsky DHT telemetry module and the XJT external module. Your help is requested on whether I can use both modules to increase the number of channels.
Thanks in advance
George
adding a frsky DHT module
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: adding a frsky DHT module
How many channels do you need? Using the XJT and two x8R receivers, or one X8R/X6R and using SBUS from it, gives 16 channels.
Yes, both may be installed, although care needs to be taken regarding the telemetry.
Mike.
Yes, both may be installed, although care needs to be taken regarding the telemetry.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: adding a frsky DHT module
Hear is where some more info is, this may also help in understanding and if you need to add an internal transmitter for your needs: (viewtopic.php?f=126&t=8226) and (viewtopic.php?f=126&t=7771) and (viewtopic.php?f=126&t=7792) and (viewtopic.php?f=95&t=7182).
You may only have the need of your XJT module.
Bob B.
You may only have the need of your XJT module.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).