(P1,P2 or P3) to a Taranis FrSky 6-Position Switch. Hold the left trim to the outside while powering up 9Xtreme Radio,
this will give access to the Hardware menu.
Next go to Radio Setup / Hardware and scroll to 6 Position Switch and set it to P3. Next we Calibrate newly installed FrSky 6-Position Switch.
1) Begin by rotating the 6-position switch all the way to the left, which is switch position 1.
Scroll down to 6P0 highlighting the 0000 beside 6P0 and then press MENU.
2) Next rotate the 6-Position Switch to position 2.
Scroll down to 6P1 highlighting the 0000 beside 6P1 and then press MENU.
3) Rotate the 6-Position Switch to position 3.
Scroll down to 6P2 highlighting the 0000 beside 6P2 and then press MENU.
4) Rotate the 6-Position Switch to position 4.
Scroll down to 6P3 highlighting the 0000 beside 6P3 and then press MENU.
5) Rotate the 6-Position Switch to position 5.
Scroll down to 6P4 highlighting the 0000 beside 6P4 and then press MENU.
6) Rotate the 6-Position Switch to position 6.
Scroll down to 6P5 highlighting the 0000 beside 6P5 and then press MENU.
![Cool 8-)](./images/smilies/icon_cool.gif)
8) Rotate 6-Position Switch from position 6 to position 5 and the 6P5 should change to 6P4 for switch position 5.
As you rotate through the switch positions you should see these values to change from 6P5 to 6P0. The changing values of these switch positions indicates that your FrSky 6-Position Switch is now Calibrated!
![Smile :)](./images/smilies/icon_e_smile.gif)
Aloft (US) FrSky 6 Position Mode/Flap Switch: (https://alofthobbies.com/frsky-6-positi ... witch.html).
More information for the 9Xtreme: (viewtopic.php?f=95&t=7182) and (viewtopic.php?f=126&t=8479&p=110840#p110916).
Also this video may be a help too: (https://www.youtube.com/watch?v=981zcTdqoNU).
Bob B.