MikeB wrote:Changing the stick directions should really be in the hardware menu, but it uses too much flash to move it there as the stick images are still needed in the Controls menu. What I have done though is to make changing the stick directions dependant on the hardware menu being enabled. Just power on holding the left horizontal trim to the left. This enables the hardware menu and also allows the stick direction editing to work. This is to prevent accidental changes of the stick directions.
Mike.
Hi Mike,
Is this also true for ER9X on the M64? I just tried it and I didn't get anything different than what I usually get on boot.
It beeped though, witch it normally doesn't.
First was the splash screen and then came the usual main menu. Pressing Menu or long left didn't reveal anything new.
I checked the latest Manual, at least I think it is the latest, and I couldn't find anything on it.
Is this something I should worry about?
Gerhard