Newbie to trx ID swith
-
- Posts: 9
- Joined: Wed Dec 30, 2015 5:51 am
- Country: -
Newbie to trx ID swith
Hello and thanks for having me. Ive been searching through the posts and cant find help for my question. Probably a no brainer but on my turnigy 9x with smartieparts extreme board flashed with ersky 9x9xt my mode switch ids come up as ID,,,IDwith up arrow..and IDwith down arrow. Can any body tell me wich ones are ID0..ID1..ID2? Thanks in advance...bgpoppa
Re: Newbie to trx ID swith
ID0 - Up
ID1 - Middle
ID2 - Down
João
ID1 - Middle
ID2 - Down
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Newbie to trx ID swith
This has changed recently from numbers to arrows, just as shown by João.jhsa wrote:ID0 - Up
ID1 - Middle
ID2 - Down
João
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Newbie to trx ID swith
I changed this to match the display of any 2-position switches that are changed to 3-positions ones. The arrows are intended to show where the switch is, i.e. ^ for switch up.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Newbie to trx ID swith
But as far as I can see it is still not changed everywhere.. Only place is probably the DiagSwitch menu? Everywhere else seem to still display ID0/1/2.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Newbie to trx ID swith
I probably haven't posted test versions since I changed the source files. Just checking on my 9Xtreme, it shows ID^, ID- and IDv everywhere.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 9
- Joined: Wed Dec 30, 2015 5:51 am
- Country: -
Re: Newbie to trx ID swith
So wich is wich on the menu then...is the up arrow id0 on the transmitter or is it just id(with nothing) ? The menu presents it as choices in order as id up arrow..id down arrow...just id. that seems like it would be o...1...2,,, maybe im over thinkin it and should go fl yhe cheerson to clear the mind but I sure appreciate all the help guys and gals,
Re: Newbie to trx ID swith
I explained it here..´jhsa wrote:ID0 - Up
ID1 - Middle
ID2 - Down
João
ID0 is ID ^
ID1 is ID -
ID2 is ID v
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 9
- Joined: Wed Dec 30, 2015 5:51 am
- Country: -
Re: Newbie to trx ID swith
Thanks Im diving in head first now. Like to say great place for help!!!
Re: Newbie to trx ID swith
the ID^, ID-... is already in r218i test version.
-
- Posts: 9
- Joined: Wed Dec 30, 2015 5:51 am
- Country: -
Re: Newbie to trx ID swith
Ok so I broke the cardinal rule and deleted my sd card and firmware on my turnigy and re loaded the ersky9x xt firmware, wich is what I had in it and now my id switches are showing up as id0 id1 id2. My first firmware was downloaded on a mac and sent to the cloud and installed on my windows pc. This time around I got the firmware on my windows pc. Would that have anything to do with it.
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Newbie to trx ID swith
The IDx switch change is quite recent, and only in test versions I've posted, not in the release version on www.er9x.com.
From where did you download your version?
Mike.
From where did you download your version?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 9
- Joined: Wed Dec 30, 2015 5:51 am
- Country: -
Re: Newbie to trx ID swith
I downloaded from this forum under the 9xtreme board forum from your test version list. not sure if I down loaded the same but my version says v.2644-mike...21-10-2015. Is working fine. Just thought it was strange that I was pulling out my hair then all of a sudden it was old school again