Taranis QX7 International to EU LBT

Hardware help and support for the FrSky Taranis
Post Reply
azenkwed
Posts: 2
Joined: Fri Feb 26, 2021 5:30 pm
Country: -

Taranis QX7 International to EU LBT

Post by azenkwed »

Hi All,

I am a newbie and I recently purchased a FrSky Taranis Q X7 from Banggood. I received the International version (not sure).
That's an issue because I cannot bind it to the FrSky-XSR-SIM EU LBT Wireless USB dongle.
My first question is: How can I check if my Taranis is an International version for sure? I couldn't find that information anywhere.

I have looked online, and on this forum for solutions but no luck so far. Here is what I tried:
  • I have upgraded Open TX to 2.3.11
  • I have downloaded the FW-XJT-v2.1.0
  • I have put the FW-XJT-v2.1.0 folder in the SD card in the Firmware folder
  • Then, I tried to flash the firmware named XJT_ACCST_2.1.0_LBT.frk using the option "Flash int. module"
--> the screen changes to show me a progress bar for a few seconds then I get the following error message: "FW update error. Error opening file. [EXIT]"

So I am stuck, and I cannot move forward. I would be very grateful if someone could help.

Many thanks in advance.

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Taranis QX7 International to EU LBT

Post by Kilrah »

You can't check the version currently on.
Make sure you properly eject the SD after putting the file on.
azenkwed
Posts: 2
Joined: Fri Feb 26, 2021 5:30 pm
Country: -

Re: Taranis QX7 International to EU LBT

Post by azenkwed »

I ejected the SD card properly. (right-click --> eject). I always do, but I'm still getting the error.

EDIT. I got a new SD card and started from scratch, and it worked.
THANK YOU

Post Reply

Return to “FrSky Taranis radio”