Is the Taranis Qx7 ACCST outdated
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Is the Taranis Qx7 ACCST outdated
Im trying to bind to the XM+. my mode wont change out of XJT and i need D16 .
is there anyway of doing this with this transmitter. Or should i just buy a new one?
Thanks sorry new to the FPV game
is there anyway of doing this with this transmitter. Or should i just buy a new one?
Thanks sorry new to the FPV game
Re: Is the Taranis Qx7 ACCST outdated
No, you just need to ensure the firmware versions match between the internal XJT and the receiver.
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
Can someone point me in the correct direction to find this firmware plz.
rite now my transmitter is running 2.3.0. im not sure if the receiver
needs to be flashed ether. If it does im not even sure how to do that.
rite now my transmitter is running 2.3.0. im not sure if the receiver
needs to be flashed ether. If it does im not even sure how to do that.
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: Is the Taranis Qx7 ACCST outdated
2.3.0 is the version of OpenTx firmware version.
The receiver and transmitters have another piece of firmware for RF.
Kilrah was referring to the RF firmware.
This RF firmware can be downloaded from the Frsky-rc.com web site.
However, before doing that you need to say how you are trying to change XJT.
Are you doing it on the transmitter or in Companion?
If you transmitter only says XJT are you sure you are not looking at the external module selection?
You should be using the internal module.
Have you successfully bound any other receivers to your transmitter?
Where are you located? (i.e., Do you need EU or FCC products?)
The receiver and transmitters have another piece of firmware for RF.
Kilrah was referring to the RF firmware.
This RF firmware can be downloaded from the Frsky-rc.com web site.
However, before doing that you need to say how you are trying to change XJT.
Are you doing it on the transmitter or in Companion?
If you transmitter only says XJT are you sure you are not looking at the external module selection?
You should be using the internal module.
Have you successfully bound any other receivers to your transmitter?
Where are you located? (i.e., Do you need EU or FCC products?)
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
The Qx7 had d8 and d16 when i got it from Banggood and i got it to bind o my tinyhawk freestyle 2. Then i got the Nazgul5
and i was reading some forums and it said to update the firmware. I am a total NOOB with all this stuff. So i went ahead and updated it.
Now ive just messed everything up. Ive downloaded so many firmwares, plus i dont even know if im doing it right.
Its been 2 weeks off and on trying to figure this out. Im pretty close to giving up.
and i was reading some forums and it said to update the firmware. I am a total NOOB with all this stuff. So i went ahead and updated it.
Now ive just messed everything up. Ive downloaded so many firmwares, plus i dont even know if im doing it right.
Its been 2 weeks off and on trying to figure this out. Im pretty close to giving up.
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
Would it just be easier if i just buy a new radio?
Re: Is the Taranis Qx7 ACCST outdated
Not really since retailers will have stock of devices with either v1 or v2 RF firmware.
Choose one and reflash both the module and all receivers to it.
Choose one and reflash both the module and all receivers to it.
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
I am located in Canada ive been trying to do it with companion 2.3. Im not sure if im flashing the internal or not. Thats what i would like to do.
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
ok guys so i just downloaded the FW-XJT-v2.1.0 and the FW-X7_X7S200617 is that the right files?
Re: Is the Taranis Qx7 ACCST outdated
The first one is what you want.
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
ok and i do that with the companion software?
Re: Is the Taranis Qx7 ACCST outdated
No, you put the file on the card, go to the sd browser on the radio, select it and use flash internal module.
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
Ok hank you very much for your help. I will let you know how things turn out.Thank you again
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
its still stuck in that XJT mode
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
Then if i try to open it up in bootloader mode it says not valid firmware
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
Man im just going to smash this thing soon
Re: Is the Taranis Qx7 ACCST outdated
- I never said to go in bootloader
- XJT with D16 next to it is what you want, there was never anything wrong with that...
- XJT with D16 next to it is what you want, there was never anything wrong with that...
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
so if i have XJT with D16 next to im good. because before i started all this flashing it had D16 and D8 beside it
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
Ok ive been trying this for 2 weeks now. im a total noob. so bare with me.
as of now i am running OTX Bootloader 2.2.4
then if if fire it up normally it says SD card warning expected ver: 2.2v0021
EEPR:218
ive had the Nazgul5 and goggles and radio with the xm + for over amonth now and cant get it to bind
as of now i am running OTX Bootloader 2.2.4
then if if fire it up normally it says SD card warning expected ver: 2.2v0021
EEPR:218
ive had the Nazgul5 and goggles and radio with the xm + for over amonth now and cant get it to bind
-
- Posts: 14
- Joined: Tue Jan 26, 2021 9:41 pm
- Country: -
Re: Is the Taranis Qx7 ACCST outdated
If someone can just point me to a Noob instruction link that would make my day. plz and thank you!!!!!