PPM center in output menu

General Help and support for the Taranis Radio.
Post Reply
Raythegreat
Posts: 284
Joined: Sat Apr 16, 2016 11:33 pm
Country: -

PPM center in output menu

Post by Raythegreat »

Hi,

I would like to better understand the PPM center parameter in the outputs menu.
I have 2.3.11 and taranis +.

When I change the value of PPM center, it does not show any change in my channel monitor but the servo moves??
Example: lets say I put CH3 to ppm center to 1400 us. The channels monitor of CH3 still shows the output in the center like it was still at 1500 us.
In other words, I don't see the variation in the channels monitor when I change the ppm center value. So I don't understand this since the servo has moved.
Also, what is the difference between the = and the triangle right next to PPM center on the right?

Thank you for clarifying those for me.

RTG

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: PPM center in output menu

Post by Kilrah »

Raythegreat
Posts: 284
Joined: Sat Apr 16, 2016 11:33 pm
Country: -

Re: PPM center in output menu

Post by Raythegreat »

Thank you Kilrah,

This explains it.

RTG

Post Reply

Return to “General help (FrSky Taranis radio)”