Issue binding R-XSR to Taranis X9D+

General Help and support for the Taranis Radio.
Post Reply
TaranisX9DPlus
Posts: 4
Joined: Thu Jun 24, 2021 3:45 am
Country: -

Issue binding R-XSR to Taranis X9D+

Post by TaranisX9DPlus »

Recently purchased a used Taranis X9D Plus to use with a drone. I bought a R-XSR Receiver and updated the firmware to: RCSR_ACCST_2.1.0_FCC.frk . For location, I live in Los Angeles. On the Taranis, I updated the Internal RF (XJT D16) to ISRM-S-X9DP2019_2.1.0.frsk.

On the screen for VERSION, (bootloader) its: 2.3.12-otx (1eddde1f). I am not sure if I have match the firmware correctly in order for the transmitter and receiver to bind.

When I attempt to bind I get three solid lights, a blue, red and green.

I appreciate any input or help on this.

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Issue binding R-XSR to Taranis X9D+

Post by Kilrah »

Is this an X9D+ or an X9D+2019? You flashed module firmware for the 2019 version, that won't work if it's not the radio you have.
TaranisX9DPlus
Posts: 4
Joined: Thu Jun 24, 2021 3:45 am
Country: -

Re: Issue binding R-XSR to Taranis X9D+

Post by TaranisX9DPlus »

Hello, thank you for the reply! How do I find out the exact model I have if it’s a Plus or Plus2019? Or SE?
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Issue binding R-XSR to Taranis X9D+

Post by Kilrah »

The 2019 version would have been sold as such, has an ACCESS logo on the screen bezel and a roller instead of buttons for menu navigation.
TaranisX9DPlus
Posts: 4
Joined: Thu Jun 24, 2021 3:45 am
Country: -

Re: Issue binding R-XSR to Taranis X9D+

Post by TaranisX9DPlus »

On the bottom left of my screen it says a ACCST 2.4 GHz. On the bottom right it says -plus. Pretty sure I have a X9D+, not a 2019. What firmware should I be running on the radio and XJT RF module? Thanks for the help!

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Issue binding R-XSR to Taranis X9D+

Post by Kilrah »

You need OpenTX firmware for X9D+, and the RF firmware (XJT) is on the page for the X9D+ on frsky website.
TaranisX9DPlus
Posts: 4
Joined: Thu Jun 24, 2021 3:45 am
Country: -

Re: Issue binding R-XSR to Taranis X9D+

Post by TaranisX9DPlus »

Ok. I have the Opentx hardware downloaded. But what’s confusing still is when I go to the FrSky page it says the most up-to-date firmware for the Radio OS for this model is 2018. V2.2.2018. ZIP file, inside are two EU_mode1 and two mode2 files and four NonEU_mode1 and mode2 files. I don’t know which file to install the Radios OS. EU is Europe and NonEU is the USA and everything else, right?

FrSky website says the FW for the XJT RF Module is ACCST D16 v2.1.0.

SD Card Contents date is 2018-05-28, x9dp-opentx v2.2.2-20180525
Attachments
E1BE8882-9B2F-4226-BFB8-53D30A4B0DF5.jpeg
(8.17 MiB) Not downloaded yet

Post Reply

Return to “General help (FrSky Taranis radio)”