New Taranis X9d Plus will not Bind

General Help and support for the Taranis Radio.
Post Reply
Flyer454
Posts: 1
Joined: Thu Jan 14, 2021 11:00 pm
Country: -

New Taranis X9d Plus will not Bind

Post by Flyer454 »

Greetings,

I have a new Taranis X9D Plus that I cannot get to bind to any receiver that I have. I have tried a TFR4SB (Quantity 2), X4R, D4R-II, and TFR6 receivers. I am somewhat new to this but i tried the auto function to have it self register (turning on the RX without binding) and manual binding (holding down the F/S button while powering the RX on).

Zip.

We have not been able to bind this radio to anything. However, we were able to bind the receivers to an older Taranis transmitter.

The X9D is using 2.3.0 firmware.

Internal radio is set to 'ACCESS' and Ch 1-16.

What am I doing wrong?

Thanks in advance.
IMG_2456.JPG
(2.82 MiB) Not downloaded yet
IMG_2455.JPG
(3.21 MiB) Not downloaded yet
IMG_2458.JPG
(3.01 MiB) Not downloaded yet
IMG_2459.JPG
(2.8 MiB) Not downloaded yet

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: New Taranis X9d Plus will not Bind

Post by Kilrah »

TFR4 and TFR6 are Futaba FASST receivers, they will not work with your radio.

X4R and D4R-II are not ACCESS receivers and need you to be in ACCST D16 mode, and the D4R-II needs a jumper to be bound to D16 mode as per manual.
Post Reply

Return to “General help (FrSky Taranis radio)”