jumper t16 with m9 gimbals stick inputs need inverting

Cant get your radio to work? General Hardware issues?
Post Reply
martink1974
Posts: 9
Joined: Fri Dec 06, 2019 12:46 pm
Country: -

jumper t16 with m9 gimbals stick inputs need inverting

Post by martink1974 »

hi there , i had an jumper t16 in the draw for 12 months or so that had bad gimbals so i descided to transplant what i had that were some m9 gimbals , tight fit but they work however it seems the sticks need the signals inverted for inputs to go the correct way , is there a way of doing this ?

as it is all stick calibrate and work fine but all channels are backwards


thanks in advance

martin

Post Reply

Return to “Hardware”