CM621 6 ch rx dsm2 for dx6 etc

Cant get your radio to work? General Hardware issues?
Post Reply
User avatar
stotty1111
Posts: 233
Joined: Mon Aug 11, 2014 5:56 pm
Country: France
Location: overlooking Douarnenez Bay Finistere

CM621 6 ch rx dsm2 for dx6 etc

Post by stotty1111 »

Another quick question, got cm621 clone rx , using with a 9xr pro and orangerx dsm2/dsmx module setup in protocols as normal, it binds fine, then when bind cable removed and rebooted with a motor and servo's connected, all works fine for a couple of mins then the motor goes to full speed and the servos will not work, after about 2 mins the motor and servos return to normal and the after a further 2mins full speed etc, programming prob or rx prob, before purchase I asked the vendor about compatibility assured ok.
thoughts please!!

bravenine
Posts: 1
Joined: Tue Mar 30, 2021 11:56 am
Country: -

Re: CM621 6 ch rx dsm2 for dx6 etc

Post by bravenine »

Spektrum Receivers currently use DSMX, DSMR, and DSM2 protocols. There are some 3rd party transmitters and receivers that support these protocols BUT it is important to note that Spektrum does not test with these 3rd party modules and systems and can not guarantee that they will be fully functional. forpc.onl jiofi local html
Post Reply

Return to “Hardware”