Turnigy 9x - Fudged - Battery Attachment

Cant get your radio to work? General Hardware issues?
Post Reply
TheDunce
Posts: 1
Joined: Wed Apr 29, 2020 11:02 am
Country: -

Turnigy 9x - Fudged - Battery Attachment

Post by TheDunce »

Hi Everyone,

I hope you're all good.

I've screwed up! I'm a complete novice and I think I've fudged the Turnigy 9x up. I've pulled in the wrong battery.... as it seems alot of people have.

It melted the attachment that attaches the battery. So I'm not sure if the board has been fudged or it's just the battery adapter on the board.

Is there any way of working out if I've fudged the board? Is there anywhere I can purchase this connection so I can solder it back on.

Sorry for being clueless.

Edd

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Turnigy 9x - Fudged - Battery Attachment

Post by jhsa »

Can you open it and post some pictures from the battery connector? I think you might have shorted the 2 outer pins of the connector? If so, you might have not damaged the radio itself. Check for burned tracks on the Back PCB near the connector.
By the way, does the radio work if you plug a correct battery? BE CAREFUL TO NOT REVERSE THE PLOLARITY. That will get you into more trouble :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Post Reply

Return to “Hardware”