Radiomaster 16s no Models on Companion

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
Post Reply
Acelliott
Posts: 1
Joined: Mon Aug 15, 2022 12:47 pm
Country: Europe

Radiomaster 16s no Models on Companion

Post by Acelliott »

Good afternoon all
I have a new Radiomaster 16s
I have read lots of info to make sure everything is set up properly, but when I read radio models and settings it does not reflect my TXs models
The standard models on the TX are 4 Categories, Templates, Planes, Heli and a new Category I created called Gliders

When I read radio in companion it does not show any of these it just opens one category called models

The only trouble I have had when setting up was I updated the firmware and lost the touch to my touch screen so I downloaded the factory firmware and rolled it back. Everything else is working fine since

Just seems like its not looking in the right place for my models, even though the companion set up is set to me TX SD card ????

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Radiomaster 16s no Models on Companion

Post by Kilrah »

If you have touchscreen used then your radio is running EdgeTX, not OpenTX so you need to use EdgeTX tools.
Post Reply

Return to “Software”