build opentx 2.3.xx
-
- Posts: 51
- Joined: Tue Nov 14, 2017 11:53 am
- Country: Russian Federation
Re: build opentx 2.3.xx
-DPCB=X7 -DPCBREV=TLITE
-
- Posts: 51
- Joined: Tue Nov 14, 2017 11:53 am
- Country: Russian Federation
Re: build opentx 2.3.xx
Thanks!!!
1. And which Radio type need specify in Companion Profile and SD content for Jumper -T-Lite?
I trying import-export otx file with models setting for Jumper T12 Pro but get warning about EEPROM error after write models to radio.
2. what best and easy way to gather to repository my implementation of vario sound?
Maybe others will like it too. Ofcourse after debuging and etc. I have github account.
1. And which Radio type need specify in Companion Profile and SD content for Jumper -T-Lite?
I trying import-export otx file with models setting for Jumper T12 Pro but get warning about EEPROM error after write models to radio.
2. what best and easy way to gather to repository my implementation of vario sound?
Maybe others will like it too. Ofcourse after debuging and etc. I have github account.
good food & warm summer
Re: build opentx 2.3.xx
You need to use T-Lite in companion. It's available in nightly builds, so is firmware.
Contributing code:
https://github.com/opentx/opentx/wiki/O ... t-Workflow
Contributing code:
https://github.com/opentx/opentx/wiki/O ... t-Workflow
-
- Posts: 51
- Joined: Tue Nov 14, 2017 11:53 am
- Country: Russian Federation
Re: build opentx 2.3.xx
I am debugging vario. There are some difficulties in achieving Vsp more than 2m/s.
Literally, I need to sink or climb the receiver(with altimeter) more than 2m s. In the summer I can do it, but now there is still a lot of snow and -17C.
Is it possible to assign any other variable to the vario instead of the telemetry parameter (Vsp) to simulate the vertical speed.
For example a global variable or a value from Elev.
I also noticed that the simulator does not play the vario sound when the "Silent" at zero parameter is unchecked on "Telemetry" Page/Tab.
Literally, I need to sink or climb the receiver(with altimeter) more than 2m s. In the summer I can do it, but now there is still a lot of snow and -17C.
Is it possible to assign any other variable to the vario instead of the telemetry parameter (Vsp) to simulate the vertical speed.
For example a global variable or a value from Elev.
I also noticed that the simulator does not play the vario sound when the "Silent" at zero parameter is unchecked on "Telemetry" Page/Tab.
good food & warm summer
-
- Posts: 51
- Joined: Tue Nov 14, 2017 11:53 am
- Country: Russian Federation
Re: build opentx 2.3.xx
please help me how to substitute source for verticalSpeed when simulate vertical speed via stick?
in vario.cpp
verticalSpeed = telemetryItems[item].value * g_model.telemetrySensors[item].getPrecMultiplier();
Now source is one of telemetry. (yes it Vsp)
How to assign value of elevator stick (with 0.1 multipier)?
in vario.cpp
verticalSpeed = telemetryItems[item].value * g_model.telemetrySensors[item].getPrecMultiplier();
Now source is one of telemetry. (yes it Vsp)
How to assign value of elevator stick (with 0.1 multipier)?
good food & warm summer
-
- Posts: 51
- Joined: Tue Nov 14, 2017 11:53 am
- Country: Russian Federation
Re: build opentx 2.3.xx
I tried so:
verticalSpeed = g_model.inputNames[ed->chn] / 10;
But some wrong. How to get Input value from Elevator stick?
verticalSpeed = g_model.inputNames[ed->chn] / 10;
But some wrong. How to get Input value from Elevator stick?
good food & warm summer
- Wimh
- Posts: 82
- Joined: Wed Dec 28, 2011 1:41 pm
- Country: Belgium
- Location: Vliermaal, Belgium
- Contact:
Re: build opentx 2.3.xx
I can find the T-lite firmware in the nightlies, but not the SD card contents?
edit : Downloaded from the Jumper website for the T-lite, I suppose that is good too...
Edit again, found the correct link :
https://downloads.open-tx.org/2.3/night ... rd/128x64/
Wim
Belgium
Belgium