Mixed languages Taranis X9D Plus SE

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
Post Reply
bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Mixed languages Taranis X9D Plus SE

Post by bivo »

Dears,

I bought an used Taranis X9D Plus SE.

It looks to be working properly, however, I'd noticed the screens are mixing english with portuguese language.

Does anybody know how could I solve this problem?

Althought I'm Braziliam, I prefer english language.

The firmware version is: 2.3.9-otx

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Mixed languages Taranis X9D Plus SE

Post by Kilrah »

You can flash the English version of OpenTX.
bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Re: Mixed languages Taranis X9D Plus SE

Post by bivo »

How do I know which one is the English version?
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Mixed languages Taranis X9D Plus SE

Post by Kilrah »

You select your language and options within companion, then download the corresponding firmware.
bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Re: Mixed languages Taranis X9D Plus SE

Post by bivo »

Which driver is necessary to Windows 10?
I'v tried to install the zadig-2.5 but it doesnt have the STM device to be selected

bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Re: Mixed languages Taranis X9D Plus SE

Post by bivo »

Dears,

If I update the sdcard with the last version, is it possible to update the radio firmware throught the bootload function?
bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Re: Mixed languages Taranis X9D Plus SE

Post by bivo »

One more doubt.
I've tried to update the firmware by companion, however, when I select the write it, the message below is showed. Does anybody knows what could be?

"Could not check firmware from radio"

"Opening DFU Capable USB device... Can not open device"
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Mixed languages Taranis X9D Plus SE

Post by Kilrah »

Put the file in the firmware folder on the card and flash form bootloader.
bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Re: Mixed languages Taranis X9D Plus SE

Post by bivo »

I did it, but it shows the message "Its not a valid file"

I'd copied the firmware "open TX 2.3.11" in the sdcard firmware directory.

The file is: opentx-x9d+-en.bin

Is there anything wrong?

The firmware installed is the 2.3.9
bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Re: Mixed languages Taranis X9D Plus SE

Post by bivo »

Solved!

I'd put the radio in the bootloader mode and so it communicated with companion and I updated the Kiradio firmware.

However, I found in the radio setup an option "USB Mode" that I set as "Storage" and know the radio communicates without being in the bootloader mode.
It was set as "Joystick" so i supposed it wasnt communicating for this reason.

Thank you very much for the Tips Kilrah
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Mixed languages Taranis X9D Plus SE

Post by Kilrah »

When USB mode is set as Storage you can read/write models and to the SD but not flash firmware (since the firmware is currently running), so flashing has to be done in bootloader mode.
bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Re: Mixed languages Taranis X9D Plus SE

Post by bivo »

So, how must be set the USB Mode to update radio firmware using companion?
bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Re: Mixed languages Taranis X9D Plus SE

Post by bivo »

I've noticed in my radio it doesnt matter how is set the USB mode, it just communicate with companion with the radio in the bootloader mode.
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Mixed languages Taranis X9D Plus SE

Post by Kilrah »

bivo wrote: Thu Jan 21, 2021 12:48 pm So, how must be set the USB Mode to update radio firmware using companion?
It doesn't matter since you do that in bootloader mode.
bivo
Posts: 81
Joined: Wed Jan 28, 2015 11:15 am
Country: Brazil

Re: Mixed languages Taranis X9D Plus SE

Post by bivo »

Thanks Kilrah

Post Reply

Return to “Software”