I have an X-Lite. I have installed OpenTX 2.3.7 onto it. I have copied the SD card contents onto the SD card separately - i.e. using my PC with a SD card dongle. I am now faced by what I believe is a single problem with two symptoms:
1) I can't access the SD card by plugging the X-Lite into my PC (after attaching the USB cable, I power the X-Lite on by first holding down the cross-shaped button and then pressing the power button). When I do, two new drives are detected. One, called 'Taranis', contains EEPROM.BIN, FIRWARE.BIN and FIRMWARE.TXT files. The other, called 'USB Drive (F:)' cannot be opened. I just get 'Please insert a disc into USB Drive (F:).'
2) I can't read or save models in OpenTX. (I did, however, successfully flash the X-Lite with OpenTX.)
Would greatly appreciate help!
Thanks.
X-Lite - OpenTX can't read/write models & I can't read SD card via PC
X-Lite - OpenTX can't read/write models & I can't read SD card via PC
Last edited by imfatant on Sat May 16, 2020 11:16 am, edited 2 times in total.
Re: X-Lite - OpenTX can't read/write models & I can't read SD card via PC
Does the radio itself see the SD card properly?