Weird model memory data in Companion

Post Reply
PeterB
Posts: 27
Joined: Tue Jan 07, 2020 6:40 pm
Country: -

Weird model memory data in Companion

Post by PeterB »

I have a Horus X12 with OpenTx X12S-2.3.2 firmware (updated Nov. 2019), but it appears that if I read model memories created since then into Open Companion, the inputs are blank down to about channel 17 then some weird entries, whereas models created previously have channels populated as on the Tx.
All models are ok on the Tx.
Companion is version 2.2.ON 363.
Has anyone seen this & know how to correct?

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Weird model memory data in Companion

Post by Kilrah »

You cannot use companion 2.2 with with fimware 2.3, you need to use companion 2.3.

Also you should not run a Horus on 2.3 firmware lower than 2.3.5.
PeterB
Posts: 27
Joined: Tue Jan 07, 2020 6:40 pm
Country: -

Re: Weird model memory data in Companion

Post by PeterB »

Many thanks.
Have upgraded to 2.3.7 & that seems to have fixed it.

Post Reply

Return to “openTx for FrSky radios”